Instructions / Assembly

7.ATTACHING THE CHAMBER DOOR HANDLE:

Penetrate1/4-20*12mm Hexagon Bolt(53) through Ø18*Ø6.5*2.0mm Gasket(54) and

Lid(9) directly to the handle and tighten up. Do not screw over-tight.

8.ATTACHING THE SMOKE STACK AND CHIMNEY CAP

1.Align the holes in the Smoke Stack(15) with holes in the Smoke Stack Gasket (16),

which fits between right end of the Grill and the Smoke Stack Gasket(16). Insert the

1/4-20*12mm Hexagon Bolts(53) through the holes in the Smoke Stack(15) and the

Smoke Stack Gasket(16).

2.Place a Ø18*Ø6.5*2.0mm Gasket(54) on each Bolt and secure with1/4-20 Hexagon

Nut(55).

9.POSITIONING THE DOOR HANDLE

Align the holes in the Left Door(38) with the holes in the Handle(47). Place a

Ø18*Ø6.5*2.0mm Gasket(54) on each 1/4-20*12mm Hexagon Bolt(53) and tight with

Wrench. Repeat the former step to assemble the Right Door(46).

10.POSITIONING THE DOOR:

1.Take the Right Door(46) with handle assemble. First insert the Bottom Pivot(37)

into the small hole on Platform(50).Then pull down the pivot until the upper end is

aligned with top edge of the door. Then align the pivot with the upper hole and pull

up the pivot to secure the door.

2.Repeat Step 1 to secure the Left Door(38). Make a proper adjustment until the

doors can be firmly closed.