Installation Guide

ManualsBrandsZ-Lite ManualsLighting & FansWarwick 10.5-in W Bronze Clear Glass Semi-Flush Mount Light

ASSEMBLY

ASSEMBLY AND

AND

AND INSTALLATION

INSTALLATION

INSTRUCTIONS

INSTRUCTIONS FOR

FOR

ITEM

ITEM #

# 137SF/#

137SF/#

137SF/# 140SF

140SF

NOTE

Should any difficulty be experienced, please consult a qualified electrician

before installing.

TO AVOID

AVOID

AVOID RISK

RISK

RISK OF

OF ELECTRICAL

ELECTRICAL

ELECTRICAL SHOCK,

SHOCK,

SHOCK, BE

BE SURE

SURE

SURE TO

TO SHUT

SHUT

OFF

OFF POWER

POWER

POWER WHILE

WHILE

WHILE INSTALLING

INSTALLING

INSTALLING OR

OR SERVICING

SERVICING

SERVICING THIS

THIS

THIS FIXTURE.

FIXTURE.

WARNING

Installation

Installation steps

steps

steps :

1. Turn off the electricity at the Fuse or Circuit Breaker

before installation.

2. Attach the Cross Bar to the Outlet Box

by the 2pcs Mounting Screws upwards.

3. Attached the Central Tube to the Connector,

then adjust the Central Tube to be vertical and

fix it with the Small Screw.

4. Install Bulbs. (Bulbs are not included, please

do not exceed the maximum capacity which is

recommended on the Socket Cover.)

5.Attached the End Cap and Finial to the Nipple, and

put the glass into the Metal Ring.

6. Attached the Small Chain to the Bottom

Hanging Hook.

7. Make wire connection with Wire

Connectors:

---- Connect the black Wire from

the light to the Black Wire from

the Outlet Box.

---- Connect the white Wire from the light to the

White Wire from the Outlet Box.

---- Attached the Ground Wire and House Ground Wire to the

Cross Bar with a Green Screw.

Carefully tuck wires back into the Outlet Box.

8. Carefully raise up the fixture and insert the 2pcs of Short Mounting Screws into the Canopy

and tighten with the Fixing Nuts.

9. Turn on the power at Fuse or Circuit Box and enjoy your new fixture.