Installation Sheet

ASSEMBLY AND INSTALLATION
INSTRUCTIONS FOR
ITEM: #134F# 135F# 191F# 134SF# 135SF# 191SF
NOTE: Should any difficulty be experienced,please consult a
qualified electrician before installing.
Installation steps:
1. Turn off the electricity at the Fuse or Circuit Breaker before installation.
2. Attach the Cross Bar to the Outlet Box by using 2PCS of Mounting Screws upwards.
3. Install Bulbs.(Bulbs are not included,please do not exceed the maximum capacity which is
recommended on the Socket Cover.)
4. Straight the Central Cluster to be vertical and then fixing the Small Screw.
5. Make wire connections with Wire Connectors:.
--Connect the black Wire from the light to the Black Wire from the Outlet Box.
--Connect the white Wire from the light to the White Wire from the Outlet Box.
--Attached the Ground Wire and House Ground Wire to the Cross Bar with a Green Screw.
Carefully tuck wires back into the Outlet Box.
6. Raise up the fixture and insert the 2pcs of Short Mounting Screws into the Canopy and tighten
with the Fixing Nuts.
7. Turn on the power at Fuse or Circuit Box and enjoy your new fixture.
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK,BE
S U R E T O S H U T O F F P O W E R W H I L E
INSTALLING OR SERVICING THIS FIXTURE.