Installation Sheet

ASSEMBLY AND INSTALLATION INSTRUCTIONS
Warning:
Read instructions carefully.If you are unclear as to how to proceed, consult a qualified
electrician. NOTE: Proper wiring is essential for the safe operation of this fixture.
Assembly and Installation Step:
1.Put the pipe through the cover, then screw the pipe tight onto the fixture body
2.Put rubber gasket(1),2 caps, rubber gasket (2), and finial on the pipe one by one
5.Place the Fixture to the Post, and then secure with Mounting Screws.
6.Turn on the power at fuse or circuit box.
Carefully unpack fixture and parts. Make sure all parts are included before discarding any
packing materials
Before installing, consult local electrical codes for wiring and grounding requirements
Be sure to shut off power at the main fuse or circuit breaker box before installing this fixture
Do not install or connect wires with wet hands
552PHMR-BK-LED
552PHBR-BK-LED
3.Screw the finial tight
finial
rubber gasket(2)
cap
pipe
rubber gasket(1)
cover
ASSEMBLY AND INSTALLATION INSTRUCTIONS
Read instructions carefully. If you are unclear as to how to proceed, consult a qualified
electrician. NOTE: Proper wiring is essential for the safe operation of this fixture.
Assembly and Installation Step:
1.Install the bulb in the bulb socket
2.Attach the Cover onto the Fixture body, and then secure with the nut and rubber gasket
3.Make wire connections with wire nuts:
4.Place the Fixture to the Post, and then secure with Mounting Screws.
5.Turn on the power at fuse or circuit box.
Carefully unpack fixture and parts. Make sure all parts are included before discarding
any packing materials
Before installing, consult local electrical codes for wiring and grounding requirements
Be sure to shut off power at the main fuse or circuit breaker box before installing
this fixture
Do not install or connect wires with wet hands
Warning:
a. The black wire from fixture to the black wire from power source.
b. The white wire from fixture to the white wire from power source.
c. Attach the ground wire from the fixture to the outlet box ground screw or
to the green screw located on the crossbar.
4.Make wire connections with wire nuts:
a. The black wire from fixture to the black wire from power source.
b. The white wire from fixture to the white wire from power source.
c. Attach the ground wire from the fixture to the outlet box ground screw or
to the green screw located on the crossbar.