Installation Sheet

ASSEMBLY INSTRUCTIONS

553CHB-LED

560CHB

CANOPY

NIPPLE

HEX NUT

CIRCULAR STRAP

FIXTURE LOOP

LED MODULE

GROUND GREEN SCREW

TOP LOOP

CHAIN

WIRE CONNECTOR

POWER SUPPLY WIRE

OUTLET BOX

GROUND WIRE

MOUNTING SCREW

THREADED RING

READ & SAVE

INSTALLATION & OPERATION INSTRUCTIONS

TOOLS & MATERIALS REQUIRED

Screwdriver Wire Cutters

Adjustable Wrench Wiring Supplies

CAUTION

Prior to assembly, refer to ELECTRICAL CONNECTIONS section. If you do not have electrical

wiring experience, refer to a do-it-yourself wiring handbook or have your fixture installed by a

qualified licensed electrician.

GENERAL

1. Be sure to read these instructions and review the diagrams thoroughly before beginning.

2. Electrical connections must be in accordance with local codes, ordinances, or the National

Electric Code. If you are unfamiliar with methods of installing electrical wiring, secure the

services of a qualified licensed electrician.

3. Before starting the installation, disconnect the power by turning off the circuit

breaker or by removing appropriate fuse at fuse box. Turning the power off at the light switch is

not sufficient to prevent electrical shock.

PAGE 1
ASSEMBLY INSTRUCTIONS 553CHB-LED 560CHB OUTLET BOX HEX NUT CIRCULAR STRAP POWER SUPPLY WIRE WIRE CONNECTOR GROUND WIRE MOUNTING SCREW NIPPLE CANOPY THREADED RING GROUND GREEN SCREW TOP LOOP CHAIN FIXTURE LOOP LED MODULE READ & SAVE INSTALLATION & OPERATION INSTRUCTIONS TOOLS & MATERIALS REQUIRED Screwdriver Wire Cutters Adjustable Wrench Wiring Supplies CAUTION Prior to assembly, refer to ELECTRICAL CONNECTIONS section.
PAGE 2
PREPARE THE FIXTURE NOTE: First turn off electricity 1. Thread nipple into loop until snug. Thread the other end of nipple into the crossbar strap until snug and secure with the lock washer and hex nut. Note the length of nipple into circular strap may be adjusted if necessary. 2. Attach the crossbar strap assembly to the ceiling outlet box with screws, the side of the strap marked "GND" must face out. Tighten screws securely with screwdriver.