Installation Sheet

ASSEMBLY INSTRUCTIONS
558S-BK & SL & DBZ-LED
558M-BK & SL & DBZ-LED
558B-BK & SL & DBZ-LED
GLASS
HEAT SINK
GROUND GREEN SCREW
OUTLET BOX
WIRE CONNECTOR
BLACK SUPPLY WIRE
GROUND WIRE
WHITE SUPPLY WIRE
SCREW
CIRCULAR STRAP
DECORATIVE KNOB
LED MODULE
SCREW
RUBBER GASKET
READ & SAVE
INSTALLATION & OPERATION INSTRUCTIONS
TOOLS & MATERIALS REQUIRED
Screwdriver Wire Cutters
Adjustable Wrench Wiring Supplies
CAUTION
Prior to assembly, refer to ELECTRICAL CONNECTIONS section. If you do not have
electrical wiring experience, refer to a do-it-yourself wiring handbook or have your
fixture installed by a qualified licensed electrician.
GENERAL
1. Be sure to read these instructions and review the diagrams thoroughly before
beginning.
2. Electrical connections must be in accordance with local codes, ordinances, or the
National Electric Code. If you are unfamiliar with methods of installing electrical wiring,
secure the services of a qualified licensed electrician.
3. Before starting the installation, disconnect the power by turning off the circuit
breaker or by removing appropriate fuse at fuse box. Turning the power off at the light
switch is not sufficient to prevent electrical shock.