User Manual

z-Q6 manual

Specifications

• Inputs: 3 AES/EBU (transformer-isolated, 110-ohm terminated),

• Outputs: 3 AES/EBU (transformer-isolated, 110-ohm terminated),

• Input/output precision: up to 24-bits

• Gain control: from -95 dB to +12 dB

• Gain resolution: 0.2 dB increments from +12 dB to -12 dB, 1 dB increments from -12 dB to -

20 dB, 2 dB increments from -20 dB to -50 dB, 3 dB increments from -50 dB to -70 dB, 5 dB

increments from -70 dB to -95 dB

• Filter types: 4 parametric, 2 shelving x 6 channels

• Center frequency resolution: 1/6-th octave ISO from 28 Hz to 18 kHz

• Filter gain/cut: from -95 dB to +12.0 dB

• Filter bandwidths: 12 steps from Q = 0.4 to Q = 8.0 (nominal)

• Shelf filter slopes: 6 dB/octave

• Dither types: 24-bit, 20-bit and 16-bit proprietary floating-point techniques

• Noise shaping types: POW-r curves #2 and #3

• Digital filter architecture: proprietary minimum roundoff-noise structure

• Dynamic range: better than 144 dB

• THD+N: better than -135 dB

• Processor type: TMS320C31 32-bit floating-point DSP (x3)

• Processor performance: 80 MFLOPS (x3)

• Digital audio demodulator/modulator: Crystal Semiconductor CS8414/CS8404 (x3)

• Digital audio signal transformers: Scientific Conversions SC916-01

• Sample rates supported: 44.1 kHz, 48.0 kHz, 88.2 kHz, 96 kHz

• Auxiliary-bit status handling: unit is transparent to channel status, validity, and auxiliary bits

• Number of presets: 50

• Power supply: 110/220VAC, 50/60Hz