Specifications

6
ZW2‐IR Operations

BeforeusingtheZW2‐IR, pleasereadthe[INSTALLATION]ifyouneed
tomounttheZW2‐IR toawall.PoweruptheZW2‐IR bytheUSB
Power5VdcorDrybatteryAAAx3pcs.

• Plug‐in5VdcpowerintotheUSBsocketifoperatedatAlways
Listening
mode.Or
• Install3xAAAbatteriesifoperatedatFLiRSmode.
• Pleaserefertothesectionof[MOUNTINGPROCEDURE].
• RemovethebatterycoveronthebackofyourZW2‐IR battery
chassis.
• Mountthebatterycoverintothemainunitwith2screws.
• Checkthepolarity
ofthebatteriesandthe"+/‐"marksinsidethe
batterycompartment.
• Insertthebatteries.

• Pushthebatterycoverandmainunitbackinplace.

LCAUTION(batteryandpoweradaptorsafety)
− Usenewbatteriesoftherecommendedtypeandsizeonly.
− Nevermixusedandnewbatteriestogether.
− Toavoidchemi calleaks,removebatteriesfromtheZW2‐IR if 
youdonot intend to use the remoteforanextended period
oftime.
− Disposeofusedbatteriesproperly;
donotburnorburythem.

(Pleasecarefullyreadthroughthefollowingthenstorethemanualfor
futurereference.)
