Specifications

8
Z‐WaveRemoteControl

1) Selectyouroperat ion mode;pleasereferto“ListeningMode”
section.
2) IncludeorExcludetheunitfromtheexistingZ‐Wavehome
controlnetworkwithyourprimarycontroller.
‐ Refertoyourprimarycontrollerinstructionstoprocess
theinclusion/exclusionsetupprocedure.
‐ Whenpromptedbyyourprimarycontroller,clickonce

onthePROGbutton.
‐ Theprimarycontrollershouldindicatethattheaction
wassuccessful.Ifthecontrollerindicatestheactionwas
unsuccessful,pleaserepeattheprocedure.
3) Usercanuseeitherprimarycontrollerorsecondarycontroller
(shouldsupportconfigurationcomm andclass)tosetuptheZW2‐
IR ACcodebytheparameter27
(IRcodenumberforbuilt‐in
codelibrary),pleaserefertocodelistfortheparametervalue
thensetupyourACcontrolcode.
4) Oncetheconfigurationandsetupwerecompleted,the
controllercanuseZ‐Wave“Thermostatcommandsclass”to
controltheirIR‐controlledair‐conditionerwiththeZW2‐IR. 
5) Youcanrecorddownyourdevicecodeunderthebelowtablefor
futurereferenceafter
settinguptheZW2‐IR correctly.

ACdeviceprogrammedtoyourZW2‐IR

Codeno.:
