User guide

2.2 PIR MOTION DETECTOR W.
TEMPERATURE METER
This motion detector (PIR = passive infrared receiver)
detects the presence of a person in a room. The units
send information to a controller or any other associated
Z-Wave device, the sensor is a battery-powered device,
which is in sleeping state unless an action is detected.
After a programmable sleeping time the device wakes
up and sends status information. After this the unit goes
back to sleeping modus. Batteries can be changed without
unscrewing the device from the door or frame. The unit
will give a visual warning on the device and sends a
warning to the Z-Wave controller, when batteries need to
be replaced. The unit offers a tampering control and sends
an alarm message when tampered. Package consists of
ZP 3012 sensor, adhesive tape for sensor, CR123A Lithium
Battery and Installation & Operation Manual.
FEATURES
Z-wave compatible
battery operated
two way communication
temper alarm
temperature meter
passive detection with no emission
PIR MOTION DETECTOR PREPARATION
PIR motion detector is ready for usage when its batteries
are inserted. To do that see image below.
PIR MOTION DETECTOR CAN BE SEEN IN
SENSORS WIDGET AND METERS WIDGET
PIR under Meters widget
PIR under Sensors widget
2.3 DOOR/WINDOW SENSOR
Door/window sensor is easy to install device for detecting
when door, window, container, cabinet etc. is opened or
closed. The Door/Window Sensor is a battery-powered
Z-Wave magnetic door/window sensor with an extremely
small form factor. The D/W sensor will send radio signals
up to 6 associated Z-Wave devices within its own Z-Wave
network when the main unit separates from the smaller
unit. Bidirectional mounting plate and push button allows
for easy end-user installation. The Door/Window Sensor
also has tamper prevention capabilities and low-battery
alerts. Package consists of door/window sensor main
unit, magnet, bracket for contact magnet, adhesive tape
for magnet / sensor, CR123A lithium battery, screws for
bracket/ sensor and Installation & operation manual,
FEATURES
Z-wave compatible
battery operated
tamper alarm
two way communication
10
SMART ALARM USER GUIDE v1.1