User guide

RFID KEYPAD MOUNTING
01. Use a flat screwdriver at the inlets on the sides to
gently unlock the back cover.
02. Use the designated holes on the back cover to screw
mount the iRFID.
03. Place two AA 1,5V batteries into the device.
04. Mount the iRFID onto the back cover, be sure to close
it on all sides and that the tamper gets through the
back cover of the iRFID.
05. (indication mode: Tamper pressed/released).
06. After 1 seconds startup routine begins (indication
mode: Ready for learn mode).
07. After 3 more seconds (4 seconds in total) mounting is
completed. (indication mode: Mounting successful)
08. The iRFID is now ready to use
16
SMART ALARM USER GUIDE v1.1