User guide

LOCATE YOUR SERIAL NUMBER
Your Serial number is located on the back of the
Zipabox, make a note of it as it will be required when
registering your panel online.
01
Serial number
01
CONNECT TO BROADBAND
Connect your Zipabox to your broadband router via the
Ethernet cable.
The Ethernet port is located on the back of the Zipabox.
MOUNT ANTENNA
Screw Z-wave antenna to Antenna 1 connector.
POWER UP
Plug the power adaptor into the mains supply wall socket
and the other end into the control unit.
01
Power
02
Network
03
Antenna 1
04
Antenna 2
05
Reset
01 02
03
04 05
YOU SHOULD SEE THE FOLLOWING
LED SEQUENCE:
01. Plug in power adaptor: steady blue light
for approximately 30 sec. until Linux is up. Than blue
light is flashing until Java is up.
02. Zipabox is ready: steady green light means that
Zipabox is ready, and flashing green light means that
Java is APP, but the cloud is not reachable.
03
02
01
01
Button 1
02
Button 2
03
LED indicator
4.0 CONNECT
THE ZIPABOX
17
SMART ALARM USER GUIDE v1.1