User guide

you to exit home upon arming the partition in ARM
AWAY mode.
HOME ENTRY DELAY - how many seconds home entry
zone will allow you to enter your code after it detects
you. You can also set a sound signal.
HOME EXIT DELAY - how many seconds home zone
will allow you to exit upon arming the partition in ARM
HOME mode.
SIREN - choose which device you will use as a siren for
this particular partition. You can have different sirens
for different partitions. Also, you can add more than
one siren for each partition.
SIREN TIME - set how many seconds will siren be
active once it is activated, this is good option for batery
saving as there is no need to have siren activated for a
long time after intruder is notified about detection.
There is a message sent to the central station already,
anyway.
SIREN DELAY - set how many seconds will siren wait
until start signaling. This gives you time do deactivate
alarm in case of some mistake.
QUICK ARM - allows you to arm/disarm without
security PIN, e.g. by using KEYFOB
CROSS ZONING - choose whether you will use cross
zoning in this partition or not. Cross zoning allows you
to avoid false alarm. You can set more than one sensor
in the group and upon intruder detection alarm will not
be activated before second zone is confirm detection. If
you allow using cross zoning here, you will be able to
add zone in groups later, in each zone settings.
HEALTH CARE - if you are using this partition for
ELDERLY CARE (tracking possible immobility), you
should check this option. Instead of working as ordinary
alarm, this partition will send alert in case there is no
any activity detected in certain period of time.
TIME - set period of time in which some zone (sensor)
in this partition have to detect activity
ALWAYS ARMED - if you like to use this partition for
FIRE ALARM, or other SAFETY ALARMS which
shouldn’t be armed/disarmed, but armed all the time,
check this option.
REPORTS TAB
Please note that you should set contacts for each
partition separately.
You can also, set different contacts for SMS alerts,
PHONE CALL alerts and EMAIL alerts.
Here you can select contact which will be contacted in
case of security alerts sent by this particular partition.
USERS TAB
Under Users tab, quick access to your alarm functions
can be set up. The easiest and quickest way of controlling
your Alarm is to use devices like RFID keypads, keyfobs,
panic buttons and others.
This will enable control of your Alarm functions Arm
away, Arm home, Disarm, Panic without any need of first
accessing your Dashboard and Security widget.
Arm your alarm, simply by pressing button when exiting
and disarm it with a tag or code input on your RFID
keypad when returning home.
Any device that can be used as Alarm control will be
shown in drop down.
In order to use your devices as Alarm control, don’t forget
to enable Quick arm function under your alarm partition
General settings.
25
SMART ALARM USER GUIDE v1.1