User guide

Zipabox main user ( parent user ) will automatically show
up in Users tab. Any additional Zipabox user ( child user)
will not have permission to control Alarm. To enable
Alarm control for child Zipabox users, go to General
widget settings, and under the Users tab give them
Alarm control privileges by checking Alarm check box.
CONTROLS
This is easiest way to program your keyfobs for using
them to ARM/DISARM this partition. System will find all
KEYFOBs joined into your Zipato network, and offer you to
choose which button you would like to use for:
ARM AWAY
ARM HOME
DISARM
PANIC
CREATE ZONES
Zone is the are covered by one sensor (e.g. window
sensor placed on living room window representing the
zone “living room window”). Zones are elementary parts
of any security system as they are watching for certain
activity or inactivity if you are using them in reversal
mode (detecting immobility of elderly care).
To create new zone, click
on partition tab. In “new
zone” window you can set following parameters:
ENDPOINT - here you can choose which sensor you
would like to represent this zone (e.g. motion detector,
door sensor, flood detector...)
ARM STATE - here you can select which state of this
sensor will activate alarm. For example, most alarms
are set to alert in case window sensor is opened while
system is armed. As you create as many partitions for
various purposes, you can create partition in which
you will get alert in case window is closed while this
partition is armed. This can be useful during cleaning
or ventilation.
CATEGORY - here you can choose to which category
your zone belongs. Please note that different categories
will be armed differently (e.g. if you like this zone to be
armed in ARMED HOME mode, you should set it to be
PERIMETER,)
CROSS ZONE GROUP - you can add this zone to a group
in which you can add other zone. Zones within one
group will need other zones to confirm their detection.
CROSS ZONING TIME - time in which some other zone
should confirm activity detection
BYBASS ALLOWED - here you can forbid or allow this
zone to be bypassed
26
SMART ALARM USER GUIDE v1.1