User guide

INCLUDE OR EXCLUDE RELAY SWITCH FGS221
Add Double Relay Switch to the network by pushing three
times push button key no. or service button B located
inside the housing of the device. For bi-stable switch
perform 3 position changes.
10.12 UNIVERSAL DIMMER FGD211
Remotely controlled Dimmer is designed to operate with
or without neutral lead. It may be used as a switch in
systems without neutral lead.
As the Dimmer it operates under the following loads:
conventional incandescent halogen 230V low voltage
halogen 12V (with electronic transformers)
dimmable LED
when used with FGB001 it may operate with any
dimmable load up to 300W
Moreover, as an electronic switch it may work with:
compact fluorescent lamps LED bulbs, fluorescent
lamps with electronic stabilisers and majority of
conventional stabilisers for loads other than resistive
do not exceed 1.5A current
Microprocessor control
Soft start.
May operate in 3-way systems
Memory of the last lighting level settings
The device may be operated by mono-stable and bi-
stable
INCLUDE OR EXCLUDE DIMMER FGD211
The Dimmer enters the mode of inclusion/exclusion after
a quick pressing three times the push-button connected
to S1 terminal or service button B located inside the
housing. For bi-stable switch perform 3 position changes.
10.13 ROLLER SHUTTER FGR221
Remotely controlled Roller Shutter Controller is designed
to control motors of roller shutters, awnings, etc. It has
the function of detecting the current state of a controlled
device, e.g. position of roller shutter.
Microprocessor control
Executive elements: relays.
The device may be operated by mono-stable and bi-
stable
push-buttons and by push-buttons dedicated for roller
shutters.
INCLUDE OR EXCLUDE ROLLER SHUTTER
CONTROLLER FGR221
Add the Roller Shutter Controller to the network by
pushing three times push button key no. 1 or service
button B located inside the housing of the device.
44
SMART ALARM USER GUIDE v1.1