User guide

TO SUSTAIN DESIRED TEMPERATURE
and humidity (set-point value) Climte widget uses
hysteresis logic. Hysteresis range defines set_point
tolerance. Even Greater cost reduction is achieved by
using hysteresis.
CREATING NEW CLIMATE
Click on icon in upper right corner of Climate
widget to start new Climate. Next window will appear
with all device endpoints that can be used for
configuring climate.
In Name field write name of new climate. Select all
endpoints that will be used from drop down menu
then click on save button. New climate will show up in
Climate widget.
TEMPERATURE
Heating outputs - used for controlling heating devices,
air conditions and etc. by using actuators. For example,
if you like to control radiator you can use battery
powered thermostatic valve, with built in wireless
module for communication with Zipabox, or you can
use regular thermostatic valve powered by electrical
current and use actuator switches which are able to
communicate with Zibabox and control those valves.
Here you can choose devices like actuators or electrical
valves, or virtual devices (e.g. Infra-Red codes which can
turn on/off your heating body) which you would like to
include to virtual zone/room.
Climate widget is a graphical user-friendly interface for controlling room/zone temperature and humidity.
It can use all available thermometers and hygrometers to achieve efficiency and cost reduction
while sustaining desired temperature and humidity in one room or whole house.
11.1 CLIMATE
11.0 WIDGETS
45
SMART ALARM USER GUIDE v1.1