User guide

OFF  heating and cooling is turned off.
For each temperature adjustment there is four types of
control that can be activated by clicking on proper button.
Run program: click on icon. Climate is
operated by preprogrammed settings
Untill next period: click on icon. Climate is
operated by manually adjusted settings but, it will go
back to previously preprogrammed mode once the mode
change is done by scheduler. Example, if thermostat is
adjusted manually at 2pm and thermostat is scheduled to
go in comfort mode at 6pm it will go to comfort mode at
6pm as scheduled.
Permanent hold: click on
icon. Climate is
operated by manual settings until changed by user.
Hold for: click on icon to pop up window
where exact amount of time can be set for operating with
manual settings. Afterwards, scheduled settings starts.
AUTOMATIC CONTROL
Automatic temperature control is made by scheduler ac-
tivating climate mods at desired time of day trought whole
week. To create scheduler temperature control, click on
settings icon in upper right corner of Climate widget.
From here daily and weekly scheduler can be made.
PROGRAM TODAY  Program today is used for
temperature adjustment on daily basis. Click and
move border between cooling (blue) and set_point
tolerance (green), heating (orange) and set_point
tolerance (green) up or down for temperature
adjustment. Then, click on save button.
PROGRAM WEEK  Weekly program is used for
temperature adjustment on weekly basis. Here
scheduler for weekly temperature control is made.
Select field in a table that is in desired time of a day.
Each field can then be marked with corresponding
color that represents climate mod.
When selection is made new window pops up with a
choice for climate mod.
47
SMART ALARM USER GUIDE v1.1