User's Guide

Right Side of Machine

Computer USB Port

Depth Selection

Arrow

1. Plug Power Cord into Universal Power Supply.

2. Plug Universal Power Supply into side of eclips

2 Machine.

3. See Bluetooth

Instructions or for USB connection:

1. Plug USB cable into back of eclips2 Machine.

2. Plug flat end of USB cable into USB port of computer.

CONNECTING

SET UP

DO NOT adjust blade depth while Machine is operating.

NOTICE

SET UP

SETTING THE BLADE DEPTH

Lower Number for Thinner Material

Higher Number for Thicker Material

Printed on a ring around the Blade Holder Top are Blade Depth Settings, ranging from 1

to 6. These numbers can be selected individually by setting the Depth Selection Arrow on the

number relative to the material you will be cutting.

As a general rule, thinner materials, such as cotton fabric, paper and vinyl, require

a lower number Blade Depth Setting, while thicker materials, such as fabric with iron-

on backing, light chipboard and heavy cardstock, require a higher number Blade Depth

Setting. For optimal results, try a test cut and make the necessary adjustments to the settings

before performing the ﬁnal cut.