User Manual

INSERTING/REMOVING YOUR DEVICE

Because the power and volume control buttons on your

device sit higher than on other devices, please take extra

care when inserting it into the Rugged Messenger cover.

To do this, follow these instructions:

1. Insert your device at an angle such that the power

and volume control buttons ﬁt into their respective

cutouts on the Rugged Messenger cover.

2. Set the rest of your device into the cover and press

it in. Press all around your device to ensure it has

seated properly.

3. To easily remove your device from the case, separate

the case from the keyboard, and then gently roll the

rubber overmold away from the edges while pressing

the tablet from behind. Grasp your tablet’s exposed

side and lift/pull away from the Rugged Messenger.

USING THE STAND

1. To use the magnetic, built-in kickstand, lift the cover

o the keyboard and lay it ﬂat.