User Manual

1
POWERING ON AND OFF
2. Place your device in the magnetic recessed groove located in the
middle of your Rugged Messenger where you will feel it connect
with the magnets.
3. While holding your device in place, fold the cover toward your device.
Let the cover fold in along the groove to create the built-in stand.
ADJUSTING THE VIEWING ANGLE
Your Rugged Messenger case features built-in magnets that work
together with the built-in stand to create multiple viewing angles. To
adjust the viewing angle on your Rugged Messenger, simply slide the
built-in stand up or down along your Rugged Messenger case until you
feel the magnets connect.
Caution: sliding the stand to the very top of the device may result in an unstable position.
4. Place the end of the cover close to the top
of your device and you will feel the magnets
connect, securing the stand in place. You
can now rest your device against the stand
for a convenient viewing angle.
1. To turn your Rugged Messenger on, press the Power button located at
the top right corner of the keyboard. The keyboard backlights will turn
on and begin pulsing for about two seconds while the keyboard powers up.
2. To turn your Rugged Messenger o, press and hold the Power button
for three seconds. The keyboard backlights will pulse for about two
seconds and then turn o, indicating your Rugged Messenger has
turned o.
2