*WARRANTY REGISTRATION Your ZAGGkeys™ MINI 7 comes with a one year manufacturer’s warranty. You must register it and keep your receipt of purchase to activate the warranty. If you purchased it on ZAGG.com, ZAGG® has already registered your ZAGGkeys MINI 7 and has your proof of purchase. NEED MORE HELP? PLEASE SEE OUR FAQ SECTION AT: www.ZAGG.
INSERTING/REMOVING YOUR iPAD To insert the iPad® MINI, have keyboard closest to you with iPad home button on the right and snap the iPad into the grooves, making sure it is firmly set in place. To remove the iPad, snap it gently out of the casing. POSITIONING AND POWERING ON To power on your keyboard, press the power button. The LED status light with illuminate red for 5 seconds, and To position, pull out the kickstand and lean back.
PAIRING YOUR ZAGGkeys MINI 7 The Bluetooth® keyboard should only need to pair to your iPad once as follows: 1. On the iPad select: Settings > General > Bluetooth > On. 2. P r e s s t h e p a i r b u t t o n o n t h e k e y b o a r d . T h e L E D status light will flash blue until the device is paired. 3. The iPad will display “ZAGGkeys MINI 7” as an available device. Select this option to complete pairing. CHARGING Your keyboard comes with a charging cable that plugs into the side of the device.
SPECIAL FUNCTION KEYS Your keyboard has been designed with special function keys to give you more control of your iPad.
LIGHTS AND BUTTONS Battery indicator: When FN + the battery indicator key is pressed, the LED status light will blink to indicate the battery level; green for 50-100%, yellow for 20-50%, red when less than 20%. Once red you should have about two weeks of normal use left. normal use left. The LED status light will Power light: Light will illuminate red for 5 seconds, and Pairing light: Remains solid blue when caps lock is active, flashes blue when pairing.
TROUBLESHOOTING What to do if the iPad does not respond to the keyboard. A few things can cause this problem: -Dead battery -Need to pair the keyboard to the iPad again -Problem with the keyboard Please follow the steps below to find out the problem and appropriate solution. 1. R e s t a r t y o u r i P a d b y h o l d i n g d o w n t h e h o m e a n d power button simultaneously until it resets. Let go of the buttons when you see the Apple® logo. 2.
5. If you see ZAGGkeys MINI 7 listed as an “available device” on your iPad, click on the arrow to the right and choose to have your iPad “forget the device.” 6. P u s h t h e p a i r b u t t o n o n t h e k e y b o a r d a n d w a t c h for the LED light to flash blue. 7. If you see ZAGGkeys MINI 7 listed as an “available device,” select it. 8. Your keyboard should now be paired. 9. I f y o u r i P a d g i v e s y o u a n e r r o r m e s s a g e , r e p e a t process again. 10 .
F. After installation is complete, repeat troubleshooting pro ces s . *** If you receive the same error message during pairing, you may have a problem with your keyboard. Please contact customer support at ZAGG.com to res o l v e t h e p r o b lem . NEED MORE HELP? PLEASE SEE OUR FAQ SECTION AT: www.ZAGG.com/faq For unparalleled scratch protection we recommend ZAGG’s invisibleSHIELD®or ZAGGskins™. ©2005 - 2012 ZAGG Inc. All Rights Reserved.
