User's Manual

ManualsBrandsZAGG ManualsComputers & AccessoriesBluetooth Keyboard

ZaggSlimCover

SlimCoverInstructions



WarrantyRegistration

YourZAGGSlimCover™comeswithaone‐yearmanufacturer’swarranty.Inordertoactivatethe

warranty,youmustregisteryourSlimCoveraswellaskeepyourpurchasereceipt.Ifyoupurchased

yourZAGGSlimCoverfromZAGG.com,ZAGGhasalreadyregistereditandhasacopyofyourproofof

purchase.



NEEDMOREHELP?PLEASESEEOURFAQSECTIONAT:www.ZAGG.com/faq



Introduction

CongratulationsonpurchasingtheZaggSlimCover–thepremiertabletkeyboard

fortheMicrosoftSurface™Pro3and4.YournewZaggSlimCoveroperates

seamlesslywithyourSurfacePro3and4togiveyoumorefunctionality,aneasier

typingexperience,andaddedprotection.Readtheseinstructionscompletelyand

keeptheminasafeplaceforfuturereference;andnow,getreadytoexperience

mobiletypingthat’sasversatileasyouare.



PoweringOnandOff

TurningyourSlimCoverKeyboardoniseasy.Justpressandfn+Deletekeys.A

greenLEDwilllight,indicatingyourkeyboardison.



ToturnyourSlimCoverKeyboardoff,pressthefn+Deletekeysfortwoseconds.A

redLEDwillflashindicatingyourkeyboardisoff.



PairingYourSlimCoverKeyboard

YourSlimCoverkeyboardpairstoyourSurfaceviaBluetooth®3.0.Thatmeansyou

cantypeonyourkeyboardwithoutitbeingconnectedphysicallytoyourSurface.As

anaddedfeature,yourSlimCoverkeyboardcanpairwithtwoMicrosoftdevicesat

onceforultimateconvenience.Youshouldonlyneedtopairyourkeyboardonce,

MicrosoftSurfacePro3or4

Summary of content (6 pages)

PAGE 1
Slim Cover Instructions Warranty Registration Your ZAGG Slim Cover™ comes with a one‐year manufacturer’s warranty. In order to activate the warranty, you must register your Slim Cover as well as keep your purchase receipt. If you purchased your ZAGG Slim Cover from ZAGG.com, ZAGG has already registered it and has a copy of your proof of purchase. NEED MORE HELP? PLEASE SEE OUR FAQ SECTION AT: www.ZAGG.
PAGE 2
using the following directions. If the connection between your Surface and Slim Cover is ever lost, repeat these steps. 1. Access the Bluetooth settings on your Surface. 2. Press the (Bluetooth)1 or (Bluetooth)2 key depending on which one you want associated with your Surface. Recall, the Slim Cover can pair with two Microsoft devices at the same time. A blue LED will begin flashing indicating your Slim Cover is in pairing mode. 3. Your Surface will display “ZAGG Slim Cover” as an available device.
PAGE 3
(Bluetooth symbol)1 – Pairs your Slim Cover with your preferred device. If you have paired with a second device (see below) press (Bluetooth symbol)2 to instantly switch to that device. (Bluetooth symbol)2 – Pairs your Slim Cover to a second device. If you have paired your Slim Cover with a device using (Bluetooth symbol)1, press that key to instantly switch to the device associated with that key. (Lock symbol) ‐ Locks your Surface. You will need to enter your password again when you unlock it.
PAGE 4
Delete – Deletes copy from left to right. + fn + Delete – Turns your Slim Cover on and off. + fn + Space ‐ Toggles between international keyboards (when activated in your Surface’s settings). Note: This key won’t do anything unless you have international keyboards activated in your settings. + fn + Right Ctrl (Show the key with the light on it) – Toggles the backlights on and off.
PAGE 5
Zoom Out – Place two fingers spread apart on the touchpad and, while still touching the touchpad pinch your fingers closer together. Troubleshooting If your Surface does not respond to your Slim Cover there may be a simple explanation such as a dead battery or an unsuccessful pairing. Please use the following to help troubleshoot your situation. If none of the following solve your issue, then please contact ZAGG Customer Service and one of our trained professionals will be happy to assist you. 1.
PAGE 6
FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.