Specification
Kitchen Faucet
Installation Instruction
Tools you may need when installing the faucet.
1)Adjustable Wrench; 2) Tape Measure; 3)Basin Wrench;
4)Sealant Tape; 5)Screwdriver
*Please READ ALL the instructions before installation.
Before you begin:
(1)Check the condition of the new faucet and all the accessories.
Wipe the faucet with a soft cloth. Wipe the faucet with a soft cloth.
(2)Make sure you have all the tools needed.
(3)Shut off the water supply valves and clean up the water supply
system.
(4)Make sure the mounting hole size is between Φ33mm-Φ35mm.
(5)Clean the areas of the mounting hole before installation.
Parameter:
(1)Recommended water pressure range: 0.05-0.75 Mpa.(1)Recommended water pressure range: 0.05-0.75 Mpa.
(2)Working Temperature is above 0 °C/32F.
(3)Do not use stream for hot water. The recommended
temperature of water supply is below 85°C/185F.