User's Manual

T2 T3
* PW-OK sense level : 95% of nominal
2.3.1 REMOTE ON/OFF CONTROL
PAGE: 4/9
MODEL NO: ZM460-APS REV.1.1 DATE: 2005. 03. 24
ZALMAN SPECIFICATION
95%
2.3.2 POWER UP DELAY
PS_ON
DC Enable
an active-low, TTL-compatible signal("PS-ON"). The +5VSB is on whenever the
AC power is present.
PS_OFF
. When PS-ON is pulled to TTL high or open circuited, the DC outputs are
to be disabled. Turn ON/OFF delay ≥ 1sec
The power supply DC outputs (with the exception of +5VSB) shall be enabled with
. When PS-ON is pulled to TTL low, the DC outputs are to be enabled.
10%
T4
PWR-OK
2.3 TIMING / HOUSE KEEPING
The output voltages shall rise from 10≤ T2 ≤90% of nominal to within the regulation
ranges specified in sec 2.2.1 within 0.1≤ T2 ≤20ms