CNPS5700D-Cu User’ s Manual (English Edition) http://www.zalman.co.kr E-mail : zalman@zalman.co.
1. Features 1) ZALMAN CPU coolers do not generate noise or vibration in Silent Mode. 2) Pure copper as the base material ensures excellent heat dissipation. 3) New user-friendly design creates ease in installing and removing the product. 4) Use of an 80mm fan maximizes airflow for optimized cooling conditions. 5) The adjustable fan speed connector(FAN MATE 1) enables one to control the noise and performance of the fan to your preference.
. Exploded View Bolt-B Air Duct Bolt-A Air Duct Base Fan Heatsink Duct Rotating Clip Retention Guide Static Clip Heatsink 4. Patent Applications Patents Applications Pending in over 20 nations around the world, including the U.S.A., E.U., and Japan Korean Patent Application Nos. 01-69984, 01-69985 and 02-23963 * The specifications of any product may change without prior notice to improve the performance thereof.
5. Components 1) FHS(Flower HeatSink) Assembly (CNPS5700D) 2) Thermal Grease 3) Adjustable Fan speed Connector (FAN MATE 1) 4) Manual 6. For Use With : INTEL Pentium 4 - Socket 478 1) Silent Mode : Up to 1.8 GHz (Willamette - 0.18 micron) (1) Up to 2.8 GHz (Northwood - 0.13 micron) 2) Normal Mode : 2.8 GHz and Higher (2) Note 1) The ‘Willamette’ CPU was discontinued after the release of the 2.0GHz version. Note 2) Should you use a CPU faster than 2.8GHz check the Zalman Tech website (www.zalman.co.
How to Install 1. Thinly spread the thermal grease on the CPU core’s surface contacting the FHS. 2. Hook the static clips on the mainboard’s Retention Guide as shown in Fig. 5. To identify the static clips, refer to Fig. 1. Air Duct Heatsink Duct Static Clip Thermal Grease Retention Guide Retention Guide 3.
5. Slightly unscrew the Bolt-B on the Air Duct and turn the top part of the duct to the left or right so that the duct faces the exhaust fan as shown in Fig. 8. Then, screw in three Bolt-B’s tightly to hold its position. Caution) If the Air Duct cannot face the exhaust fan as shown in Fig. 8 even after turning the duct fully, separate the duct from the Air Duct Base, make appropriate adjustments to the direction of the duct, and reassemble the duct. See Figs. 2 and 9 for a better understanding.
Usage & Caution 1. When Adjusting the Fan Speed The exhaust fan must be at the same speed or faster than the CPU cooler’s fan in order for this product to perform optimally. Having a slower exhaust fan can cause a drop in the cooling performance of the product. 2. Checking CPU Compatibility & Using FAN MATE 1 Read ‘For Use With’ section and make sure your CPU is compatible before using the CPUcooler.
