Zalman Tech Co., Ltd. User’ s Manual CNPS6000-Al CNPS6000-AlCu CNPS6000-Cu http://www.zalman.co.kr E-mail:zalman@zalman.co.
CNPS6000-Al, CNPS6000-AlCu, CNPS6000-Cu Zalman’s CNPS6000-Al / 6000-AlCu / 6000-Cu coolers include a new fan assembly (FB123) with an adjustable bracket and a bigger fan for better cooling performance. The new fan assembly can be positioned to provide optimal cooling in almost any motherboard/standard case configuration and allows an additional fan to be installed for cooling a NP VGA Card. 1. Features 1) Zalman’s CPU Coolers do not generate noise and vibration in Silent Mode.
2) Fan ① Dimensions : 92(L) X 92(H) X 25(W)mm ③ Speed : Silent mode :1300 RPM±10% Normal mode : 2500 RPM±10% ⑤ Bearing Type : 2-Ball 2) FAN MATE 1 ① Dimensions : 200(L) X 23(W) X 21(H) mm ③ Speed : Output Voltage : 5V ~ 11 V± 2% ② Weight : 85g ④ Noise : Silent mode : 20.0dB±10% Normal mode : 32.0dB±10% ② Weight : 20 g ④ Allowable Wattage : 6W or lower 4.
Exploded drawing of the product CPU & Socket FHS Clip Fan Br123 Fan Fix 1 } FB123 < Figure 1 > Installation of FHS 1. Spread the thermal grease thinly onto the CPU core’s surface that comes in contact with the FHS as shown in Figure 2. 2. Install the clip across the FHS as shown in Figure 2 3. Hook the short leg of the clip onto the socket first, then hook the long leg on by pushing the hole in the leg with the heatsink installation tool or an ordinary screw driver as shown in Figure 3. 4.
Installation of fan bracket 1. As shown in Figure 6, you can freely place the fan and the bracket in any desired location with the FB123. Therefore, place the fan in an ideal location as shown in Figure 5. You can also place an additional fan on the FB123 to maximize the cooling of the VGA Card as shown in Figure 7. 2. Screw on the FB123 firmly at the VGA Card slot hole and the expansion slot hole next to it with the included bolts. (Caution! The included bolts are of two types: inch-sized and mm-sized.
Adjusting Fan Speed 1. Connect FAN MATE 1 (adjustable fan speed connector) to the 3-pin connector of a fan as shown in Figure 8. 2. Connect FAN MATE 1 to the 3-pin CPU fan connector of the mainboard. 3. Turn on the computer after assembly is finished. 4. When booting a computer in which FAN MATE 1 is used, an alarm sound may be generated by a system monitoring program to indicate that the rotation of the CPU fan is slow.
