User’ s Manual (English Edition) Intel Pentium 4 Socket 478 CPU AMD Athlon / Duron / Athlon XP Socket 462 CPU AMD Athlon 64 Socket 754 CPU CNPS7000A * Please read before installation http://www.zalman.co.kr http://www.zalmanusa.
1. Features 1) Does not generate noise or vibration in Silent Mode. 2) Pure copper and/or pure aluminum base materials ensure excellent heat dissipation. 3) Intel Pentium 4 (Socket478), AMD Athlon/Duron/Athlon XP (Socket462), Athlon 64 (Socket754) compatible design for broad compatibility. 4) 92mm fan inside the FHS maximizes airflow and makes installation easier. 5) Adjustable fan speed controller (FAN MATE 1) enables control of noise and fan performance. * Fan should be set to Normal Mode if overclocking.
. Exploded View Fan Clip Bolt Fan Bracket Heatsink Screw for Fan Screw for Fan Support 4. Patents Korean Patent Application No. 00-54635 Korean Design Application Nos. 02-17470, 02-25208, 02-25209, etc. Patent Applications pending in over 20 nations around the world, including USA, EU, and Japan 5. Cautions During Installation 1) If excessive force is exerted on the fan, it may malfunction and result in damage to the product and/or the computer.
5.
Caution) ① As shown in Figure 2 a motherboard that is not compliant with the “10.2mm motherboard component height restriction” standard, introduced by Intel, may create interference between components and the clip. Please do not install the CNPS7000A when this interference is observed. ② No components higher than 3.9cm should be present within 5.5cm radius from the center of the CPU to install this product. 10.
7. Installation (INTEL Pentium 4-478) CPU (IHS) 1) Apply Thermal Grease Spread thermal grease thinly and evenly over the CPU core. Thermal Grease Clip Support Retention Guide 2) Install Clip Support Install the two clip supports at both sides of the retention guide as shown on the right. Bolt 3) Insert Bolts Insert the bolts into the inner holes on the clip. Outer Hole Inter Hole Clip 4) Fasten Bolts Place the FHS on the center of the CPU.
8. Installation- AMD (Athlon/Duron/Athlon XP-462) B-Type Clip Support (White) 1) Install Clip Support Install the socket 462 Clip Supports as shown on the right. Ensure to install A-Type clip support(Blue) by the Lever. Small Washer A-Type Clip Support (Blue) Lever M/B Small Washer Bolt B-Type Clip Support (White) CPU 2) Apply Thermal Grease Spread thermal grease thinly and evenly over the CPU core. Thermal Grease Bolt 3) Insert Bolts Insert the bolts into the inner holes on the clip.
9. Installation- AMD (Athlon 64-754) 1) Fasten Nipples Locate the backplate on the bottom of the mohterboard under the CPU socket, then fasten the nipples as shown on the right. Big Hole Washer Nipple M/B When installing CNPS7000A on Athlon 64,Retention Frame is not needed. Backplate CPU (IHS) 2) Apply Thermal Grease Spread thermal grease thinly and evenly over the CPU core. Thermal Grease Bolt 3) Insert Bolts Insert the bolts into the outer holes on the clip.
10. Notes on Usage 1) Checking CPU Compatibility & Using FAN MATE 1 Read “Compatible CPU Types” on page 4 to confirm that your CPU is compatible before using the CPU cooler. The speed control knob on FAN MATE 1 can be turned to set the fan speed. When it is turned counter-clockwise, the fan operates in Silent Mode at its minimum speed. NOTE) FAN MATE 1 has been specifically designed to be used with the fan included in this product. Zalman Tech. Co., Ltd.
