User’ s Manual (English Edition) Intel Pentium 4 Socket 478 CPU AMD Duron/Athlon/Athlon XP Socket 462 CPU AMD Sempron/AMD64 (Athlon 64/Opteron) Socket 754/939/940 CPU CNPS7000B * Please read before installation http://www.zalman.co.kr http://www.zalmanusa.
1. Features 1) Does not generate noise or vibration in Silent Mode. 2) Pure copper and/or pure aluminum base materials ensure excellent heat dissipation. 3) Intel Pentium 4 (Socket 478), AMD Duron / Athlon / Athlon XP (Socket 462), and Sempron / AMD64 (Socket 754/939/940) compatible design for broad compatibility. 4) 92mm fan inside the FHS maximizes airflow and makes installation easier. 5) Adjustable fan speed controller (FAM MATE 2) enables control of noise and fan performance.
4. Patents Korean Patent Application No. 00-54635 Korean Design Applications Nos. 02-17470, 02-25208, 02-25209, etc. Patent Applications pending in over 20 nations around the world, including USA, EU, and Japan Precautions 1) If excessive force is exerted on the fan, it may malfunction and result in damage to the product and/or the computer. 2) Do not put your finger in the fan while it is running. 3) Keep the product away from children.
6. Compatible CPUs 1) Intel Pentium 4 - Socket 478 All speeds of Pentium 4 Socket 478 CPUs up to 3.4GHz When using 3.4GHz Northwood CPU or Prescott CPUs of 2.8A/E GHz or faster, please refer to the following table to set the fan speed accordingly for sufficient cooling. < CNPS7000B Fan Speed Table > CPU Northwood Prescott 3.4 2.8A/E, 3.0E, 3.2E, 3.
3) AMD Sempron / AMD64 - Socket 754/939/940 All CPUs conforming to Socket 754/939/940 platform ① Cautions ) ① No components higher than 39mm (possible examples: PSU, graphics card, RAM, etc.) should be present within a 55mm radius from the center of the CPU to install this product. ② For more information, please visit the Zalman website (http://www.zalman.co.kr) and refer to“CNPS7000(A/B) “Compatible Socket 754/939/940 Motherboards List”link. 7.
8. Installation (AMD Duron / Athlon / Athlon XP - 462) 1) Install Clip Supports for Socket 462 Install the clip supports for socket 462 on the motherboard. Make sure to place A-type (blue : installed near the lever) and B-type (white) supports at the appropriate location. The installation should be done in the order of : bolts > small washers > motherboard > small washers > clip supports (see below).
9. Installation (AMD Sempron / AMD64 - 754/939/940) 1) Fasten Nipples Place a big washer on the motherboard. Then, put a nipple over it and fasten the nipple until the motherboard is firmly stuck to the backplate. * Retention Guide is not needed when installing CNPS7000B on Socket 754/939/940. Nipple Motherboard Big Washer Backplate 2) Apply Thermal Grease Clean off particles and residue and then spread the included thermal grease thinly and evenly over the CPU that touches the FHS surface.
※FAN MATE 2 Installation and Usage 1) Installing FAN MATE 2 on the Inside of the System Fan Connector (CNPS7000B) 2) Installing FAN MATE 2 on the Outside of the System Double-sided Tape FAN MATE 2 Motherboard Connect the appropriate 3-pin connector on the cable to the motherboard fan header and the CNPS7000B’s fan connector.
12. Zalman Noise Prevention System When building a noiseless computer, use Zalman’s Noiseless Power Supply, Noiseless Case Fan, Fanless Northbridge Cooler, Heatpipe HDD Cooler, Heatpipe VGA Cooler, and Fan Controller to achieve stable performance and maintain a noiseless environment. Noiseless Power Supply Noiseless Case Fan ※ Fanless Northbridge Cooler Heatpipe HDD Cooler Heatpipe VGA Cooler Fan Controller The specifications of any product may change without prior notice to improve performance.
