(English version) CNPS7500 LED Intel Socket 775 CPU Core 2 Duo Pentium D Pentium 4 Celeron D Intel Socket 478 CPU Pentium 4 Celeron D Celeron AMD Socket AM2/ 754/939/940 CPU Athlon 64 Athlon 64 X2 Dual-Core Athlon 64 FX Opteron Dual-Core Opteron Sempron * Please read this manual thoroughly before installation. http://www.zalman.co.kr http://www.zalmanusa.
1. Features 1) Does not generate noise or vibration in Silent Mode. 2) Pure copper and/or pure aluminum base materials ensure excellent heat dissipation. 3) Compatible with all single and dual core CPUs for Intel Socket 775/478 and AMD Sockets AM2/754/939/940. 4) The high intensity blue LED installed silent 110mm fan inside the heatsink maximizes cooling performance. 5) The adjustable fan speed controller (Fan Mate 2) enables control of noise and fan performance. 2. Specifications Model Spec.
4. Patents Korean Patent Reg. No. 389257 Korean Design Reg. No. 327440-3 Patent applications pending in over 20 nations around the world including USA, EU, and Japan. Precautions 1) Use and keep the product away from the reach of children. 2) Check the components list and condition of the product before installation. If any problem is found, contact your place of purchase to obtain a replacement. 3) Excessive force exerted on the fan may damage the fan, resulting in damage to the system.
6. Compatible CPUs 1) All CPUs conforming to Intel Socket 775 platform Caution) ① No motherboard components with a height greater than 39mm, as well as the PSU, disk drives, VGA card, and RAM should be present within a 61mm radius from the center of the CPU. 37mm 61mm 2) All CPUs conforming to Intel Socket 478 platform Caution) ① As shown in Figure 2, a motherboard that is not compliant with the "10.
7. Installation (Intel Socket 775) 1) Clip Support Installation Align the Clip Support for Socket 775 and the Backplate for Socket 775 with the mounting holes on the motherboard and fasten them together using the Clip Support Fixing Bolts. The Lever Slot on the Clip Support for Socket 775 should be properly oriented on the hinged side of the Socket Lever when installing.
8. Installation (Intel Socket 478) 1) Clip Support for Socket 478 Installation Assemble one pair of Clip Supports for Socket 478 as shown in the diagrams below, then insert the assembly into the Retention Frame on motherboard. Make sure the assembly remains firmly in place. Retention Frame 2) Thermal Grease Application Thermal Grease Clear off particles or any residue from the top of the CPU then spread a thin layer of the included Thermal Grease thoroughly on top of the CPU.
10. Fan Mate 2 Installation and Usage 1) Fan Mate 2 Installation on the Inside of a System 2) Fan Mate 2 Installation on the Outside of a System Double - sided Tape Speed Control Knob Fan Connector (CNPS7500) Fan Mate 2 6-Pin Connector Motherboard Connect the two 3-pin connectors of the cable to the Motherboard and to the CNPS7500’s Fan Connector as shown in the diagram.
12. Zalman Computer Noise Prevention Systems Zalman's Noiseless Power Supplies, Fanless Northbridge Coolers, Heatpipe HDD Cooler, Noiseless Case Fans, VGA Coolers, and Fan Controllers facilitate stable performance and a noiseless computing environment. Noiseless Power Supply Noiseless Case Fan Fanless Northbridge Cooler Heatpipe HDD Cooler Ultra Quiet VGA Cooler Fan Controller 13.