(English version) CNPS8700 CNPS7500 LED Intel Socket 775 CPU Core 2 Quad Core 2 Extreme Core 2 Duo Pentium D Pentium 4 Celeron D AMD Socket AM2/754/939/940 CPU Athlon 64 FX Athlon 64 X2 Dual-Core Athlon 64 Opteron Dual-Core Opteron Sempron * Please read this manual thoroughly before installation. http://www.zalman.co.kr http://www.zalmanusa.
1. Features 1) Compatible with all single, dual, and quad core CPUs for Intel socket 775 and AMD socket AM2/754/939/940. 2) Compatible with Slim Tower / Low Profile Home Theatre PC Enclosures. 3) 100% pure copper heatsink with aerodynamically optimized “tunnel” design for high performance cooling. 4) Patented curved heatpipe design for heat transfer performance of up to 4 heatpipes using just 2. 5) Ultra-thin 0.2mm fins for minimized weight and significantly reduced airflow resistance.
4. Patents Korean Patent Registration No. 10-0600448 Korean Design Registration No. 07-9753 Patent applications pending in over 20 nations around the world including the USA, EU, and Japan. Precautions 1) Use and keep the product away from the reach of children. 2) Check the components list and condition of the product before installation. If any problem is found, contact your place of purchase to obtain a replacement.
6. Compatible CPUs 1) All CPUs conforming to Intel Socket 775 platform 2) All CPUs conforming to AMD Socket AM2/754/939/940 platform Caution) No motherboard components such as the PSU, disk drives, VGA card, and RAM with a height greater than 39mm should be present within a 61.5mm radius from the center of the CPU. 38mm 30mm 61.5mm 61.5mm < Intel Socket 775 > < AMD Socket AM2/754/939/940 > 7.
2) Clip Installation Insert the Clip(⑦) between the Heatpipes. Turn the Clip so that the central hole comes in alignment with the Base Cover’s projecting part. Now attach the Clip so that its central hole slides over the projecting part of the Base Cover. Do not exert any excessive force on the fan during the Clip installation. Excessive force on the fan could lead to product damage.
8. Installation (AMD Socket AM2/754/939/940) 1) Clip Installation Insert the Clip(⑦) between the Heatpipes. Turn the Clip so that the central hole comes in alignment with the Base Cover’s projecting part. Now attach the Clip so that its central hole slides over the projecting part of the Base Cover. Do not exert any excessive force on the fan during the Clip installation. Excessive force on the fan could lead to product damage.
9. FAN MATE 2 Installation and Usage 1) FAN MATE 2 installation inside a System Fan Connector (CNPS8700) 2) FAN MATE 2 installation on the outside of a system Double - sided Tape Fan Mate 2 6-Pin Connector Motherboard Connect the two 3-pin connectors of the cable to the motherboard and to CNPS8700’s Fan Connector as shown in the diagram. Pull the 6-Pin Connector out of the system through the back and connect it to FAN MATE 2, which should be installed on the case using the included Double-sided tape.
11. Zalman Computer Noise Prevention Systems Zalman's Noiseless Power Supplies, Fanless Northbridge Coolers, Heatpipe HDD Cooler, Noiseless Case Fans, VGA Coolers, and Fan Controllers facilitate stable performance and a noiseless computing environment. Noiseless Power Supply Noiseless Case Fan Fanless Northbridge Cooler Heatpipe HDD Cooler Ultra Quiet VGA Cooler Fan Controller 12.