FATAL1TY... THE FIRST OF HIS KIND Johnathan “Fatal1ty” Wendel is the most accomplished, professional PC Gamer in history and is the breakthrough name and face of the sport. As the world’s most famous PC gamer he spreads interest in PC gaming wherever he goes and, in the process, has become the sport’s worldwide ambassador. Wendel wants PC gaming to be considered a true sport and considers himself an “E-Sportsman”.
Cautions on Use and Installation 1. By installing this product on a VGA (Video Graphics Array) card, a PCI slot adjacent to the PCIe (or AGP) slot will become unusable. 2. If this product will be installed on a recently released VGA card, please check for compatibility at Zalman’s website first. 3. The product cannot be installed on Matrox VGA cards, NVIDIA PCX 5 *** , NVIDIA Geforce 6600 AGP Series and ATI Radeon 9550/9600 Series. 4.
Exploded View VGA Cooler RAM Heatsink Nipple Rubber Ring VGA RAM VGA Chipset PVC Washer Spring Fixing Nut ※ The specifications of any product may change without prior notice to improve performance.
Installation Procedure ※ The following installation sequence MUST be followed. ( VGA RAM Heatsink Attachment → Thermal Grease Application → Nipple Installation on the Retention Guide → VGA Cooler Installation → Spring Insertion on the Fixing Nut → Fixing Nut Assembly on VGA Cooler’s Nipple → VGA Card Installation → Fan Power Cable Connection) 1. VGA RAM Heatsink Attachment Remove the film from the thermal tapes on the bottom of the RAM Heatsinks and attach the heatsinks on the VGA RAM.
4. VGA Cooler Installation ① Insert the Rubber Rings into the VGA cooler’s Nipple. ② Install the Nipple-attached VGA cooler on the VGA card’s Mounting Holes. ※ The VGA Chipset MUST be positioned on the center of the VGA Cooler’s base. ③ Simultaneously hold the VGA Cooler and the VGA card with one hand, then flip the VGA card so that its rear-side is facing upwards.
6. Fixing Nut Installation on the Nipples ① Place a PVC Washer over each Nipple. ② Slightly screw each of the four Spring-attached-Fixing Nuts onto each Nipple, then tighten each Fixing Nut one rotation at a time until all are completely tightened. Note 1) Fully tightening one Fixing Nut at a time may result in damaging the VGA chipset. Please tighten each Fixing Nut one rotation at a time until all are completely tightened.
