ENGLISH Ver. 1.
ENGLISH HD135 English ඞ Please read this manual thoroughly before installation. ඞ Visit our website and watch the HD135 installation video first to assist you in the installation process. E-mail: zalman@zalman.co.kr w w w. z a l m a n . c o . k r w w w. z a l m a n u s a .
HD135 ඟ Introduction Congratulations on your purchase of Zalman's HD135 Home Theatre PC Enclosure! You are now about to experience Zalman's world of silent computing. The HD135 is designed for ultra quiet home theatre PC operation, utilizing optimized ventilation and anti-vibration reinforcements, making it ideal for environments that require silence such as living rooms, bedrooms, educational facilities, and offices. ඟ Contents 1. Safety Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1. Safety Notices 1) Avoid inserting finger or any objects into the system while the power is ON. It may harm the user or cause product damage. 2) Make sure to check the manual when connecting the cable. Improper connection can cause fire resulting from short circuit. 3) Always shut down the operating system and switch the power to OFF before disassembling. 4) The air vents on four sides of the unit must not be blocked. 5) Use in a flat, stable, and well-ventilated area.
HD135 3. Components 1) HD135 Body Top Cover Fan & Air Duct ODD Bracket HDD Bracket HDD Bracket External Drive Cover Body 2) Case Parts 24 HDD / Power Supply Bolts (PH #6-32X6) 24 1 ODD Aluminum Bezel ODD / FDD / Motherboard Bolts (PWH M3X5) 1 Clamp 2 microATX Standoffs (M3) 1 User's Manual 3) M-Play Parts 4 1 Remote Controller 1 Installation CD 2 Batteries (AAA) 1 User's Manual The specifications of any product may change without prior notice to improve performance.
4. Features 1) Optimized Design for Silence A. Designed for High TDP Processors: Air Duct and two Fans allow quiet cooling of up to 130W TDP CPU processors (Intel Pentium D 830, 840, 940, 950, 960 etc.). ENGLISH HD135 B. Designed for High Performance Power Supply: Air Vents allow cold air intake from outside the PC directly into the Power Supply to minimize its noise level and to achieve highest possible efficiency. C.
HD135 3) Diverse Functions and Accommodations A. Microsoft MCE-compatible remote control and multimedia software are provided. This enables the user to easily control the PC and execute various multimedia software. B. USB2.0 ports on the front panel and the IEEE1394 (Firewire) I/O Port allows easy access to connections. A headphone and microphone can also be conveniently connected to the audio ports in the front. C. Sliding-type HDD and ODD Brackets provide easy installation/removal.
HD135 ½ Enclosure Type ½ Dimensions (LXWXH) ½ ½ ½ ½ ½ ½ Weight Material Motherboard Compatibility Power Supply Support PCI/AGP Card Support Drive Bays ½ Cooling Components ½ Expansion Slots ½ Front I/O Ports ½ Available Colors ½ Display Type ENGLISH 5. Specifications - Desktop - 435mm X 425mm X 135mm (17.1inch X 16.7inch X 5.31inch) - 5.2kg (11.5lb) - Aluminum - ATX / microATX - ATX / ATX 12V - Full Size - 5 X 3.5" Internal Drive Bays - 1 X 3.5" External Drive Bay - 1 X 5.
HD135 6. Installation Guide 1) Opening the Enclosure To remove the lid of the enclosure, unscrew the two Bolts (Finger Bolt, #6-32) and slide backwards and lift the Top Plate as shown in the figure below. Finger Bolt (#6-32) TOP Plate 2) Removing the ODD and HDD Brackets Remove the Fixing Bolts (Bolt, PH M4x5), and push the ODD and HDD Brackets towards the back of the enclosure by approximately 15mm(0.6inch). Now lift the Brackets.
3) Assembling the Motherboard and Power Supply Mount the motherboard and power supply by using appropriate bolts. Mount the computer components (CPU, VGA, RAM etc.) onto the motherboard. Bolt (PWH M3x5) ENGLISH HD135 Power Supply Motherboard Bolt (PH #6-32X6) Note) 1. To mount a microATX motherboard, first attach the two provided microATX Standoffs and align them with the height of the ATX Standoffs. ATX Standoff microATX Standoff 2.
HD135 4) Installing 5.25" and 3.5" Drives (1) To install the FDD and Card Reader onto HDD Bracket, the External Drive Cover assembled on the Front Plate must first be removed. (2) Attach the 5.25" drive (ODD) and 3.5" drive (HDD, FDD, Card Reader) onto the ODD and HDD Brackets with the use of appropriate Bolts. (3) Push the ODD and HDD Brackets into the enclosure, and install them onto the Front Plate with the use of Fixing Bolts (Bolt, M4x5).
5) Deciding on Air Duct Location Install the Air Duct connected to the Top Plate right above the CPU cooler for optimal CPU cooling. ENGLISH HD135 Top Plate Air Duct Note) CPU cooler performance will drastically decrease if the installation is made without the Air Duct. Also minimize the distance between the Air Duct and the CPU cooler by adjusting the length of the Air Duct.
HD135 (3) Front I/O Cable Connect the USB Cable, 1394(Fire Wire) Cable, and Audio Cable to the motherboard as explained in the motherboard manual. mGw G} mGpVvGw 12 The specifications of any product may change without prior notice to improve performance.
(4) VFD Multi-Cable ྙ Connect the VFD Power Connector to the Power Supply Connector. ྚ Connect the VFD USB Connector to the motherboard's USB Port. ENGLISH HD135 Front Plate inside View VFD VFD Power Connector Power Supply Connector VFD Motherboard USB Port VFD USB Connector Note) 1. Must refer to the motherboard manual for the USB Port Pin arrangement when connecting the VFD USB cable. Incorrect connection can cause damage to the VFD resulting from a short circuit. 2.
HD135 ྛ Place the Temperature Sensor on a place of preference inside the Enclosure. ྜ Connect the Motherboard Power Connector to the motherboard's Front Panel Port (refer to the motherboard manual). ྜྷ Connect the Fan Connector to the Fan installed on the Top Cover, and assemble the Top Cover. Bottom Plate Fan Top Cover Fan Fan Connector VFD Motherboard Front Panel Port Motherboard Power Connector Temp. Sensor 1 Temp.
7) Attaching the Aluminum ODD Bezel (1) Connect power to the assembled system. Press the ODD Eject button to eject the ODD Tray. (2) Remove the plastic ODD Bezel. (3) Expose the Tape Film on the inside of the aluminum ODD bezel, and stick the aluminum ODD bezel to the ODD tray.
HD135 7. Recommended Use (O) (O) (X) 1) Recommended Placement for the HD135 Placement of this system on a well-ventilated area (good intake of cold air and release of hot air) allows efficient cooling of computer components even in low RPM mode, which is the quietest operation. The noise level of the power supply (main factor of noise emission) will also significantly decrease due to better cooling efficiency.
4) Recommended Computer Components for a Silent Home Theatre PC ½ CPU ½ CPU Cooler ½ ½ ½ ½ ½ : Any CPU in the market : Silent CPU cooler with great cooling performance and height of less than 69cm(2.7inch) VGA : VGA card equipped with a silent VGA cooler VGA Cooler : Silent VGA cooler Power Supply : Power Supply equipped with a 120mm fan(HD135 is provided with an Air Vent for power supplies equipped with a 120mm Fan).
HD135 8. Technical Information : Performance Test Results The following is the temperature for each component and system noise measurements with maximum CPU load for a system equipped with Intel Pentium D 830 with TDP of 130W. ྙ Performance Test Results System Component Temperature ( ) CPU VGA System System Noise (dBA) Silent Optimal Cooling 67.54 52.18 46.60 30.70 Silent Maximum Cooling 60.59 46.33 41.78 41.70 Standard Cooling 66.23 44.46 43.46 50.
9. Zalman Enclosures Home Theare Computer Enclosure Gaming Computer Enclosure < HD160 > ENGLISH HD135 TNN (Totally No Noise) Computer Enclosure < TNN300 > < TNN500AF > 10. Trademarks and Copyright Notice ̱ All trademarks mentioned in this manual are properties of their respective owners. - ZALMAN and HD135 are registered trademarks of ZALMAN Tech Co., Ltd. - Intel and Pentium D are registered trademarks of Intel Corp.
