English
HD500 Series 1 Cautionary Notes (2) Before installing, check the components and condition of the product, and if any problem is found, contact the retailer. (3) Avoid inserting objects or hands into the system while it is in operation to prevent product damage and injuries. English (1) Please read this manual thoroughly prior to installation. (4) Check the manual when connecting cables. Incorrect connections may cause short circuits leading to fire hazards.
HD500 Series 2 Specifications Mo dels HD503 Enclosure Type HTPC Dimensions (W×H×D) 450 × 170 × 455mm (17.6” X 6.8” X 17.9”) Weight Main Unit: 8kg(17.6lb) / with packaging: 9.6kg(21lb) Materials Aluminum / Plastic / Steel Color Black / Silver Compatible Motherboards Standard ATX / mATX Compatible PSUs Standard ATX / ATX12V PCI/AGP Compatibility Full Size (Up to 260mm) 5.25” Bays 2 (Hot Swap Bay × 1) 3.
HD500 Series English 3 Components (1) Main Unit Top Panel HD501 ODD Chassis HDD Chassis Main Chassis HD503 Top Panel ODD Chassis HDD Chassis Main Chassis 3
HD500 Series (2) Parts [HD501, HD503] 13 X M otherboard/ PSU Bolts 2 X H DD Bolts (Hot Swap Bay) 4 X ODD Bolts 2 × mATX Standoffs 4 X SSD Bolts 1 X Clamp 1 X User’s Manual 10 X Cable Ties 1 X Lock Plate Bolt 1 X Lock Plate 1 × SSD Bracket 1 × C PU Power Extension Cord (3) iMON Components [HD503] Remote Control 2 X Batteries(AAA) 4 iMon User’s Manual Installation CD
HD500 Series 4 Front Panel Components ⑦ English HD501 ⑥ ① ⑤ ② ① ② ③ ④ ③ ④ Power Button Power LED Reset Button HDD LED ⑤ Front I/O Port ⑥ HDD Hot Swap Bay ⑦ 5.25” ODD Bay HD503 ⑩ ① ⑨ ② ⑧ ③ ① ② ③ ④ ⑤ ④ ⑤ ⑥ LCD & IR Receiver Power Button Power LED Reset Button HDD LED ⑦ ⑥ ⑦ ⑧ ⑨ ⑩ Media Control Button Volume Control Knob Front I/O Port HDD Hot Swap Bay 5.
HD500 Series 5 Installation (1) Installation Preparation 1) Unfasten the rear screws and remove the Top Panel. 1 2 2) U nfasten the two screws (Top and Side) holding the ODD Chassis. With the Side Button pressed, push the ODD Chassis towards the rear to remove.
HD500 Series English 3) U nfasten the HDD Chassis’ Handscrew (Top) and Fixing Screw (Bottom) ,then move sequentially in the directions as indicated by the numbered arrows in the diagram to remove. 2 1 (2) Motherboard and PSU Installation PS U Install the motherboard (with CPU, RAM etc. installed) and PSU.
HD500 Series Tip If the motherboard is of the mATX standard, please install the mATX Standoffs before motherboard installation. mATX Standoff (3) ODD Installation Install the ODD into an available slot in the ODD Chassis and fasten with ODD Bolts.
HD500 Series (4) 3.5” HDD Installation Use the Hand Screws to attach the Handle to the HDD. English To remove Handle, pull upwards while pressing the Hook Button. Push the HDD into the slot until there is a “Click” sound. D HD HDD Tip ▶ H DD removal is possible without removing the HDD Chassis from the main unit. ▶ P lease properly align the HDD and HDD Handle during installation and assembly.
HD500 Series (5) SSD or 2.5” HDD Installation Insert the SSD in the SSD Bracket and fasten with SSD Bolts. Reattach the HDD handle to the SSD Bracket. SSD Bolt SSD SSD Push the SSD into the slot until there is a “Click” sound. Tip Two SSD’s can be installed on a single Bracket. D SS Caution Installing HDD’s to the bottom rung can cause short circuiting so please make sure to install HDD’s to the top rung.
HD500 Series (6) ODD/HDD Chassis Assembly 1 English 1) P ush the ODD Chassis into its slot until there is a “Click” sound and fasten with Hand Screws. 2 2) P ush the HDD Chassis into its slot and fasten with the Hand Screws. 1 2 Tip If the case is frequently transported, please fasten the ODD Chassis (Top) and HDD Chassis (Bottom) before use.
HD500 Series (7) Hot Swap Bay Installation 1) HDD Tray Removal Push the Hot Swap Bay Cover to open. SH PU While squeezing and holding the Hot Swap Tray’s Hook in ‘Direction 1’, pull in ‘Direction 2’ to remove the Hot Swap Tray. 1 1 2 2) 3.5” HDD Installation ‘Open’ the Hot Swap Tray by pressing the Hot Swap Tray’s Hooks located on the underside, and pushing in the direction as shown the diagram.
HD500 Series Align the HDD’s screw holes with the Hot Swap Trays Fixing Pins, then ‘close’ the Hot Swap Tray by pushing in the protruded section. English D D H D D H Check that the Hot Swap Tray’s Fixing Pins and the HDD’s holes are properly aligned and fastened. Fully insert the HDD installed Hot Swap Tray into the Hot Swap Bay. D HD D D H Tip If the system is frequently transported the Hot Swap Tray can be secured by installing the HDD Bolt as shown in the diagram.
HD500 Series 3) Hot Swap Cable Connection 4 Pin Power Port (HDD) S-ATA Port 4-Pin Power Port (Fan) 3-Pin Fan Connector Fan Speed Control Switch (Up: 12V/ Down: 5V) The S-ATA cable and power cable MUST be connected to the S-ATA Port AND 4-Pin Power Port before powering ON. Warning For stable operation, please turn the system OFF before HDD removal.
HD500 Series (8) Cable Connections English 1) Front Panel I/O Cable Connections [HD501, HD503] e-SATA USB HD Audio AC’97 Audio 2) DFSTN and Media Controller Cable Connections [HD503] Please refer to the motherboard’s manual for cable connections to the motherboard.
HD500 Series 6 Optional Fan Installation Unfasten the Fixing Bolts and press the Hooks towards each other to pull the Side Panels off. Install the 2 X 120mm fans to the locations shown in the diagram.
HD500 Series 1) Installation Location For adequate air flow, please install the system in a well ventilated area. Low air flow can cause high fan RPM, which can create unwanted noise. O O English 7 Recommended Use X 2) Cable Routing Please use the provided Clamp and Cable Ties for cable management. Tip Keeping the case free of cable clutter will allow better air flow for enhanced cooling performance.
HD500 Series MEMO 18
