User’ s Manual (English Edition) Intel Pentium 4 Socket 478 CPU AMD Athlon/ Duron/Athlon XP Socket 462 CPU AMD Athlon 64 Socket 754 CPU ZM-WB2 Gold * Please read before installation http://www.zalman.co.kr http://www.zalmanusa.
1. Features 1) Gold plated pure copper base maximizes cooling performance and prevents CPU blocks from galvanic corrosion 2) Intel Pentium 4 (Socket 478), AMD Athlon/Duron/Athlon XP (Socket 462),Athlon 64 (Socket 754) compatible design for broad compatibility. 3) Three types of compression fitting are offered for use with water tubes (8X10mm,8X11mm,10X13mm) * Zalman Tech. Co., Ltd. is not responsible for any damage resulting from CPU OVERCLOCKING. 2.
. Exploded View 1) Exploded view of CPU block ① a Block base ① b Block cover ⑬ Fittings ⑬ ① b ① a ② 2) Exploded view for CPU type using ZM-WB2 Gold ② ② ④ ④ ④ ① ① ① ⑦ ⑪ ⑩ ⑧ ⑥ ⑨ ⑫ Intel Pentium 4 Socket 478 CPU AMD Athlon 64 Socket 754 CPU ⑩ ⑨ AMD Athlon/ Duron/Athlon XP Socket 462 CPU * The specifications of any product may change without prior notice to improve the performance thereof.
. Components 1) Common Components ① CPU block - 1 pc. ② Hand screw - 2 pcs. ③ Thermal grease - 1 pc. ④ Clip - 1 pc. ⑤ User’s manual ⑬ Fittings - 6 pcs.
. Compatible CPU Types 1) Intel Pentium 4 - Socket 478 All speeds of Pentium 4 Socket 478 CPUs Caution As shown in Figure 2, a mainboard that is not compliant with the “10.2 mm mainboard component height restriction” standard, introduced by Intel, may create interference between components and the clip. Please do not install the ZM-WB2 when this interference is observed. 10.
. Cautions During Installation 1) Keep this product away from children. 2) Zalman Tech. Co., Ltd. is not responsible for any problems arising from using the product outside its intended purpose.. 3) The exposed core of a Socket 462 CPU can be damaged if proper care is not taken. Read the “Installation” section thoroughly before installing. 4) Please do not install this product if ZM-WB2 interferes with any mainboard components. 5) Zalman Tech. Co., Ltd.
3) Insert Hand screws Insert hand screws into the inner holes on the clip. Hand screw Outer hole Clip 4) Fasten Hand screws Inner hole Place the CPU block on the center of the CPU. Screw in both Hand screws in an alternating fashion until they are completely tightened. Clip 8. Installation-AMD XP/Duron, Socket 462 1) Install Clip spport Install the socket 462 clip supports as shown on the right. B-Type Clip Support (White) Be sure to install A -Type clip Paper support (Blue) next to the lever.
CPU 2) Apply Thermal Grease Spread thermal grease thinly and evenly over the CPU. Thermal Grease 3) Insert Hand screws Insert hand screws into the outer holes on the clip. 4) Fasten Hand screws Clip Outer hole Place the CPU block on the center of the CPU. Screw in both hand screws in an alternating fashion until they are completely tightened. A-Type Clip Support B-Type Clip Support Inner hole 9.
CPU 2) Apply Thermal Grease Spread thermal grease thinly and evenly over the CPU. 3) Insert Hand screws Insert hand screws into the outer holes on the clip. Thermal Grease 4) Fasten Hand screws Place the CPU block on the center of the CPU. Partially screw the bolts into the nipples. Then, screw both bolts down further in an alternating fashion until they are completely tightened. Hand screw Clip Outer hole Inner hole 10.