Specifications

RESERATOR 1 Plus
www.zalman.co.kr www.zalmanusa.com
14
6. Pump Replacement and External Water Pump Installation
6. 1 Separate the Integrated Water Pump
1) Separate the sink base : take off the sink base
from the product as shown in the diagram.
2) U nscrew the Fixing Bolts on the Water Pump :
separate the Fixing Plate and the Fixing
Bolts by unscrewing the Fixing Bolts on the
Sink Base with a screwdriver.
3) Disconnect the Water Pump Power Switch :
separate the Power Switch from the power
cable.
4) Take off the Sealing Bolt A :
separate the Sealing Bolt A from the Sink Base.
If the integrated water pump is broken or you need a water pump with higher capacity, you
can replace the water pump or install an external water pump as shown below.
Sink Base
Fixing Bolt
Sink Base
Power Switch
Sealing Bolt A