User’ s Manual (English version) Quiet VGA Cooler Model : VF700-Cu(AlCu) Please visit our website and watch the VF700 installation video for easy installation. ※ Please read this manual thoroughly before installation. ※ The specifications of this product and its components may change without prior notice to improve performance. http://www.zalman.co.kr http://www.zalmanusa.
Cautions on Use and Installation 1. Please read this manual thoroughly before installation. 2. After installing this product on a VGA(Video Graphics Array) card, a PCI slot adjacent to the AGP (or PCIe) slot will become unusable. 3. Should you install this product on a newly released VGA card, please check for compatibility at Zalman’s website first. 4. This product is not compatible with Matrox VGA cards and NVIDIA PCX 5* * * VGA cards. 5.
Exploded View Bolt A FHS Assembly RAM Heatsink VGA RAM Nipple A Rubber Ring VGA Chipset Rubber Ring Nipple B RAM Heatsink Brace Plate Bolt B * The specifications of any product may change without prior notice to improve performance.
Installation Procedure ※ The following installation sequence MUST be followed. (Nipple A and B → Brace Plate → VGA RAM Heatsinks → Thermal Grease Application → VGA Cooler → VGA Card → Supply Power) Nipple A 1. Install the Nipples ‘A’ and ‘B’ Rubber Ring Mounting Check VGA card for compatible installation Hole hole positions. Install nipple ‘A’ and nipple ‘B’ on the heatsink Mounting Holes as shown in the diagram. Remember to use rubber rings in between. Notes) The Nipples MUST be tightened by hand.
3. Attach the VGA RAM Heatsinks Remove the film from the thermal tapes on the bottom of the RAM Heatsinks and attach the heatsinks on the VGA RAM. RAM Heatsink Note 1) If thermal grease or other residue remains on the RAM, the thermal tapes will not stick. Clean the surface of the RAM with acetone or alcohol before attaching. Note 2) The bonding strength of the thermal tapes reaches 90% after 24 hours of curing. Do not put excessive force on the RAM heatsinks during this period.
. Install the VGA Card Insert the assembled VGA card into the motherboard’s AGP (or PCIe) slot. Use the Fixing Bolt to fix the VGA card on to the computer case. If the VGA card has a power connector on it, remember to plug in the power cable. AGP Slot Fixing Bolt 7. Supply Power to the Fan Connect the Multi-Connector to the power supply’s 4-pin connector as shown in the diagram.
Zalman Noise Prevention Systems When building a noiseless computer, use Zalman’s Noiseless CPU Cooler, Noiseless Power Supply, Noiseless Case Fan, Noiseless Northbridge Cooler, and Heatpipe HDD Cooler for stable performance and a noiseless environment.
