ATX MID TOWER PC CASE User's Manual 한 글 ENGLISH Ver.
Z11 Series 1 Cautionary Note 1) Please read this manual thoroughly prior to installation. 2) Before installing, check the components and condition of the product, and if any problem is found, contact the retailer. 4) Check the manual when connecting cables. Incorrect connections may cause short circuits leading to fire hazards. 5) Do not block the front intake vent or the rear exhaust vent.
Z11 Series 2 Product Details (1) Specifications Model Z11 Plus / Z11 Plus HF1 / Z11 Type ATX Mid Tower Dimensions (W×H×D) Weight 7.4kg (16.3 lb) Z11 7.3kg (16.1 lb) Materials Plastic, Steel Color Black Motherboard Compatibility Standard ATX / m-ATX Power Supply Compatibility Standard ATX / ATX12V PCI/AGP Compatibility Full Size 290㎜ (11.4") Drive Bays 5.25” External Bay x 4 3.5“ External Bay x 1, Internal Bay x 5 5.25"/3.5"/2.
Z11 Series (2)Parts Main Unit ENG User manual Stand-Off × 5 Bolt A(#6-32*6mm) × 11 [PSU, PCI] Bolt B(M3*5mm) × 17 [M/B, FDD, SSD] Bolt C(M3*6mm) × 12 [5.25”Bay ODD] Bolt D(#6-32*4mm) × 20 [3.5” Bay HDD] Bolt E(#6-32*6mm) × 5 [3.5” HDD] HDD Anti-vibration rubber × 20 [3.
Z11 Series 3 Installation (1) Side Panel Removal ② ① (2) Motherboard Installation There are 4 Stand Offs preinstalled. Please refer to the diagrams below for additional Stand Off positions (based on motherboard type).
Z11 Series (3) 5.25” and 3.5” Drive Installation 1) Front Cover Removal ENG PULL 2) ODD Installation Bolt C 3) 2.5” / 3.
Z11 Series ② Attach Drive to Tray A. 3.5” FDD Installation B. 3.5” HDD Installation 5” 3. D D H 5” 3. D FD Bolt B Bolt A C. 2.5” SSD Installation SS D Bolt B (4) Front Cover Installation When removing the front cover, the power switch and extension cable are separated to prevent disconnection. Be sure to connect them before installing the front cover.
Z11 Series (5) 3.5” HDD Installation HDD Bolt D HDD Antivibration rubber ENG When transporting an assembled system, please secure the HDD with Bolt E as shown above. When removing HDD, pull the fastening lever outwards and then remove it.
Z11 Series Front Panel I/O Port Audio HD Audio AC ’97 USB 2.0 X 2 USB 3.0 or USB 3.0 MotherBoard Reset HDD LED ※USB 3.0 is only supported in Z11 Plus / Z11 PLUS HF1 ※ Power and I / O ports to connect please refer to your motherboard. manual. ※ Product design and specifications may be revised to improve quality and performance. (7) 2.5” HDD / SSD Optional 2.5" HDD and SSDs can be installed on the right side of case as shown in the diagram below.
Zalman Tech Co., Ltd. #1007 daeryung Techno Town III, 448 Gasan-dong, Gumchun-gu, Seoul, 153-803,Korea Tel: +82-2-2107-3232 / Fax: +82-2-2107-3322 / www.zalman.com / e-mail: zalman@zalman.com Zalman USA, Inc.
