User’ s Manual (English Edition) Model : ZM-2HC2 NP Heatpipe HDD Cooler * Please read before installation http:// www.zalman.co.kr http:// www.zalmanusa.
1. Product Features ● Cools HDD for more stable operation ● Reduces HDD noise and vibration ● Fanless design ensures noiseless, maintenance-free operation NP is an Acronym for “Noise Prevention”. 2. Specifications Name NP Heatpipe HDD Cooler Weight 270g Materials Aluminum, Copper, Rubber Dimensions 143.5(L) X 146.5(W) X 36.5(H) mm Heat Dissipating Area 415 cm2 3. Patent Applications Patent Applications Pending in over 20 nations around the world, including the U.S.A.
5. Exploded View Damper Heatpipe Al Bar Damper A-Type Bolt B-Type Bolt Ground Wire Mounting Hole Sticker Manual * The specifications of any product may change without prior notice to improve the performance thereof.
6. Components ● Assembed NP Heatpipe HDD Cooler - Two (2) Al Bars - Eleven (11) Heatpipes ● Four (4) A-Type Bolts : For fastening the HDD Four (4) B-Type Bolts : For installing the HDD Cooler Four (4) Dampers : For reducing the HDD noise and vibration One (1) Ground Wire : For Grounding the HDD Spare Parts : A-Type Bolt, B-Type Bolt, Damper (One of Each) Mounting Hole Sticker : For indicating the drilling positions on the case User’s Manual ● ● ● ● ● ● See the
8. Installing the HDD 1) Seat the NP Heatpipe HDD Cooler Seat the NP Heatpipe HDD Cooler on the HDD as shown in the diagram. (Note the locations of the holes) Holes HDD A-Type Bolt 2) Fasten the HDD Screw the 4 A-Type Bolts into the holes and firmly tighten. Al Bar HDD 9. Installing the HDD Cooler in the 5.25-inch Drive Bay 1) Install the Dampers & the Ground Wire Install the 4 Dampers in the NP Heatpipe HDD Cooler.
2) Install into 5.25-inch Drive Bay B-Type Bolt Slide the completed assembly into the PC’s 5.25-inch drive bay and firmly fasten with 4 B-Type Bolts. Use one of the B-Type Bolts to link the ground wire’s Y-terminal to the chassis. [Refer to arrow B] Note) Tighten the B-type bolts enough so that they are firm, but do not cause distortion of the dampers. B 10. Installing the HDD Cooler in the Case 1) Install the Dampers & the Ground Wire Install the 4 Dampers in the holes on the bottom side of the HDD.
2) Drill 4 Holes in the Case Attach the Mounting Hole Sticker to the case in which you wish to install the HDD Cooler and drill 4 holes with 4Ødrill. Power Supply Mounting Hole Sticker Power Supply B-Type Bolt 3) Install in the Case. Put the HDD Cooler on the frame of the case and firmly fasten with 4 B-Type Bolts. Use one of the B-Type Bolts to link the ground wire’s Y-terminal to the chassis. Note) Tighten the B-type bolts enough so that they are firm, but do not cause distortion of the dampers.
11. To Build a Noiseless System For a completely noiseless system, use the following Zalman products. ● ZM300A-APF : Power Supply ● ZM-NB47J : Northbridge Cooler ● CNPS Series CPU Coolers ● ZM-F1 : Case Fan ● ZM80X-HP : Heatpipe VGA Cooler ZM300A-APF CNPS7000 Series ZM-NB47J ZM80X-HP ZM-F1 CNPS6000 Series For more information on our products, visit our website at www.zalman.co.kr. * The specifications of any product may change without prior notice to improve the performance thereof.
