User Guide

* The specifications of any product may change without prior notice to improve the performance thereof.

8. Installing the HDD

9. Installing the HDD Cooler

in the 5.25-inch Drive Bay

1) Seat the NP Heatpipe HDD Cooler

Seat the NP Heatpipe HDD Cooler on

the HDD as shown in the diagram.

(Note the locations of the holes)

Install the Dampers & the Ground Wire

Install the 4 Dampers in the NP Heatpipe

HDD Cooler. Insert the thread of one of the

dampers through the ground wire’s round

terminal for the ground. [Refer to arrow A]

2) Fasten the HDD

Screw the 4 A-Type Bolts into the holes

and firmly tighten.

Holes

HDD

Al Bar

HDD

Damper

A-Type

Bolt

Ground Wire