User’s Manual ZM - NC2500 Series To ensure safe and easy installation, please read the following precautions. www.ZALMAN.com V 1.
1. Precautions 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) Check the components list and condition of the product before use. If any problem is found, contact the retailer to obtain a replacement. Zalman Tech Co., Ltd. is not responsible for any damages due to improper product use. Excessive force exerted on the product may cause critical damage to the product and/or system. To prevent damages, do not allow objects to obstruct fan rotation.
. Components Common Components User’s Manual ZM-NC2500 ZM-NC2500S USB Power Cable ZM-NC2500Plus Y-type USB Power Cable HDD Fixing Bolts 4. Functions (1) Ports ZM-NC2500S Fan Controller USB Port(s) .
ZM-NC2500Plus 5V Power Inlet Fan Controller Mini USB Port USB Ports (2) USB Power Cable Storage .
(3) NC2500Plus 2.5” S-ATA HDD Installation(Hot Swap) ① Remove the bolts on the rear cover of NC2500 Plus. ② Slide the cover in the direction of the arrow to disassemble. ③ Use the Fixing Bolts to install the 2.5” HDD to the Cover. 5” 2. D HD ④ Re-insert the Cover and fix with Bolts. .
(4) Height Adjustment Down Up 5. Recommended Use ZM-NC2500S USB Power Cable USB device ① Connect the Notebook PC and Cooler with the included Power Cable. ② Use the Fan Controller to adjust the desired RPM and noise level. ※ The extra USB ports can be used to connect additional USB peripheral devices. .
ZM-NC2500Plus Y-type USB Power Cable ① Connect the Notebook PC and Cooler with the included Power Cable. ② Use the Fan Controller to adjust the desired RPM and noise level. ※ When using a USB hub, to ensure adequate power supply, use the Y-type USB Power Cable to connect the Notebook PC and Cooler. Caution ▶ When using the NC2500 USB port for data transfer, use devices that draw 1.9W or less. Tip ▶ ZM-NC2500Plus supports up to 5V when a USB hub is used (adaptor sold separately). er out .
GS1000 / GS1000SE • E-ATX / Standard ATX / microATX Compatible * Supports Intel Dual Xeon server motherboards • UP to 6 Hot Swap HDD Bays * GS1000(3 Standard / 3 Optional) * GS1000 SE(Optional) • Tool-Free HDD Installation • Airflow Optimized Design • Vibration Absorbing HDD Dampers and Feet • The World’s First Roller Rails for Smooth & Easy PSU Installation • Cable Compartment Behind the Motherboard for Cable Management • Dedicated Fan Compartment for Fanless PSU Users • Up to a Total of 8 HDD Bays * 2 Ada
