User Guide

ZM80D-HP
www.zalman.co.kr www.zalmanusa.com
10
Thermal Grease
Apply Thermal Grease here
(Grooves for Heatpipes)
Frontside Heatsink
Heatpipe A
Heatpipe B
Frontside
Heatsink Base
Heatpipe B
Heatpipe A
Heatpipe A
Heatpipe B
Frontside
Heatsink Base
50 mm
30 mm
Frontside
Heatsink Base
< General VGA Cards >
<GeForce 4 Ti and GeForce FX 59 series >
Front
Back
**
Thick Paper
1) Slide in Heatpipe A and Heatpipe B into the grooves of the Base Assemblies.
2) For general VGA cards, the end of the Heatpipes should protrude approximately 50 mm from the end of the Frontside
Heatsink Base, and for Geforce 4 Ti or FX59 series, they should protrude approximately 30mm.
6.12 Installing the Heatpipe
Evenly apply Thermal Grease in the heatpipe grooves of the Frontside Heatsink as shown in the diagram.
6.13. Applying the Thermal Grease on the Frontside Heatsink
**