User Guide

www.zalman.co.kr www.zalmanusa.com
13
Frontside Heatsink
Backside Heatsink
Frontside Heatsink
Backside
Heatsink
Front
Front
Back
Back
Make sure that both heatsinks are parallel with the VGA card, and that side edges of the heatsinks are aligned.
(If the heatsinks are not properly aligned, they need to be reassembled.)
6.20 Confirming Proper Installation of the Frontside and Backside Heatsinks
1) Assemble the Plate Link Nipples, the Plate Link, Washer
and each Bolt A loosely together as shown in the diagram.
2) Slide in the Plate Link Assembly into the Channels on both
of the Frontside and Backside Heatsinks, then tighten each
Nipple. To add an Optional Fan (ZM-OP1), refer to installation
step 7.
6.21 Installing the Plate Links
Frontside Heatsink
Nipple
Washer
Bolt Head
Plate Link
Channel
Washer
Bolt Head
Washer
Bolt A (10 mm)
Plate Link
Nipple
Plate Link
Plate Link Assembly