User Guide

www.zalman.co.kr www.zalmanusa.com
15
Bolt C
Channel
Channel
Bolt C
Bolt A
Nut B
Nut B
Plate Spring
Plate Spring
< Frontside Heatsink Base > < Backside Heatsink Base >
1) For the Frontside Heatsink Base :
Assemble Bolt C and Nut B with the Plate Spring and insert this assembly into the side channel on the Frontside Heatsink Base.
2) For the Backside Heatsink Base :
Assemble Bolt C and Nut B with the Plate Spring and insert this assembly into the side channel on the Backside Heatsink Base.
6.24 Reinstalling Separated Plate Springs onto the Heatsink Base
1) Screw on the Fan Grill to the Fan with two Fan Screws. (The air flow direction of the Fan is indicated by an arrow.)
2) Insert Fan Bolt and Washer into Bolt Hole of the Fan Grill Assembly, then fasten the Fan Nipple loosely as shown in the diagram.
(Fan Bolts and Washers can be found in ZM80D-HP Spare Parts package)
3) Remove the Plate Link Assembly.
4) Insert the Fan Grill Assembly into the Backside Heatsink Channel. The Fan Bolt head should be placed into the Channel on the heatsink.
5) Tighten the Nipple by hand to fix the Fan Grill Assembly onto the backside heatsink.
6) Reinstall the Plate Link Assembly into the two heatsink channels.
7. ZM80D-HP Optional Fan (ZM-OP1) Installation
Fan Screw
Fan Grill
Bolt Hole
Fan Grill
Assembly
80 mm Slim Fan
Backside
Heatsink
Direction of
Air Flow
Plate Link Assembly
Plate Link
Fan
Nipple
Washer
Fan Bolt(26 mm)
Channel
Fan Grill
Assembly
Fan Nipple
Washer
Bolt Head
(Fan Bolt 26 mm)
Backside
Heatsink
Bolt Head
(Bolt A)
Washer
Fan Nipple