User manual
ASSEMBLY, OPERATION
CASING DIMENSIONS
PRODUCT FAMILY
The DIP-01, DIP-02 are member of the
DIX products family.
1. Disconnect the electric network by
means of an appropriate cut-off,
current-limiting circuit-breaker or
separator.
2. Check if there is no any voltage
between power leads by means of
an appropriate gauge.
3. Mount the DIP-0X device in the 60
mm junction box.
4. Connect wires accordingly to the
electrical diagram.
5. Connect power supply circuit.
The device is capable of controlling
the light of up to 350 W. It is possible to
adjust the light level by means of a single
pole push button. If needed, it is possible
to connect the push buttons in parallel
and control the lights from various pla-
ces. Short-pressing of the button (ap-
proximately 0.8 s) switches the light ON
/ OFF alternately. When the light is OFF,
short-pressing of the button switches
the light ON with maximum brightness or
switches the light OFF completely from
any brightness level. Holding the push
button for a long time (>0.8 s) allows al-
ternate uent brightening up / dimming.
Only the DIP-02 model is capable of sto-
ring the light intensity level.
WARRANTY
The product warranty is for a period of 24 months
Dealer signature & stamp, purchase date
1. ZMIE ZAMEL SP. J. assures 24 months guarantee for the product.
2. The manufacturer’s guarantee does not cover any of the following actions:
a) mechanical damage during transport, loading / unloading or under other circumstances,
b) damage caused by incorrect product mounting or misuse,
c) damage caused by unauthorised modications made by the PURCHASER or any third parties to the product or any other devices
needed for the product functioning,
d) damage caused by Act of God or any other incidents independent of the manufacturer.
3. The PURCHASER shall lay any claims in writing to the dealer or ZMIE ZAMEL SP. J.
4. ZMIE ZAMEL SP. J. is liable for processing any claim according to current Polish legislation.
5. ZMIE ZAMEL SP. J. shall process the claim at its own discretion: product repair, replacement or money return.
6. The manufacturer’s guarantee is valid in the Republic of Poland.
7. The PURCHASER’s statutory rights in any applicable legislation whether against the retailer arising from the purchase contract or
otherwise are not affected by this warranty.
CONNECTIONS
TIME DIAGRAMS
LOAD
UNIT DIAGRAM
Device version:
01 - series,
basic
02 - series with
intensity storage
10 - basic
DIM-10 only
Device type
Casing type:
M - double-module
P - for junction box
μC
brightening up / dimming
ON / OFF
b
r
o
w
n
r
e
d
b
l
a
c
k
b
r
o
w
n
r
e
d
b
l
a
c
k