User manual

Adding salt
Before first use put one litre of water in the salt container.
Water and salt can come out from the salt container when you fill it. Risk of corrosion. To prevent it, after you fill the
salt container, start a programme.
Adding rinse aid
2
1
1
2
3
4
A
2
1
The rinse aid helps to dry the dishes without streaks and stains. It is automatically released during the hot rinse
phase. Fill the rinse aid dispenser when the indicator ( A) becomes clear.
Daily use
1. Open the water tap.
2. Set the correct programme for the type of load and
the degree of soil.
Make sure that the appliance is in Programme selection
mode.
• If the salt indicator is on, fill the salt container.
3. Load the baskets.
4. Add the detergent.
5. Start the programme.
Adding detergent
2
1
2
0
3
0
A
B
If the programme has a prewash phase, put a small quantity of detergent also in compartment B.
18