User manual

Dirty filters and clogged spay arms

decrease the washing results. Make a

check regularly and, if necessary, clean

them.

Cleaning the filters

• Make sure that there are no residues of food or soil in or around the edge of the sump.

• Put back in place the flat filter (C). Make sure that it is correctly positioned under the 2 guides.

• Reassemble the filters (A) and (B).

• Put back the filter (A) in the flat filter (C). Turn it clockwise until it locks.

An incorrect position of the filters can cause bad washing results and damage to the appliance

Cleaning the spray arms

Do not remove the spray arms. If the holes in the spray

arms are clogged, remove remaining parts of soil with a

thin pointed object.

External cleaning

• Clean the appliance with a moist soft cloth.

• Only use neutral detergents.

• Do not use abrasive products, abrasive cleaning

pads or solvents.

Internal cleaning

• Carefully clean the appliance, including the rubber

gasket of the door, with a soft damp cloth.

• If you regularly use short duration programmes,

these can leave deposits of grease and limescale

inside the appliance. To prevent this, we

recommend to run long duration programmes at

least 2 times per month.

• To maintain the performance of your appliance at its

best, we recommend to use monthly a specific

cleaning product for dishwashers. Follow carefully

the instructions on the packaging of the product.

Troubleshooting

If the appliance does not start or it stops during

operation, before you contact the Service, check if you

can solve the problem by yourself with the help of the

information in the table.

With some problems different indicators flash

intermittently and/or continuously to show an alarm

code.