User manual
Problem Possible cause and solution
The dishes are wet.
• The programme does not have a drying phase or has a drying phase
with low temperature.
• The rinse aid dispenser is empty.
• The quality of the rinse aid can be the cause.
• The quality of the multi-tablets can be the cause. Try a different brand
or activate the rinse aid dispenser and use rinse aid and multi-tablets
together.
The interior of the appliance is wet.
• This is not a defect of the appliance. it is caused by the humidity in the
air that condenses on the walls.
Unusual foam during washing.
• Use the detergent for dishwashers only.
• There is a leak in the rinse aid dispenser. Contact an Authorised Serv-
ice Centre.
Traces of rust on cutlery.
• There is too much salt in the water used for washing. Refer to "The
water softener".
• Silver and stainless steel cutlery were placed together. Avoid to put sil-
ver and stainless steel items close together.
There are residues of detergent in the
dispenser at the end of the pro-
gramme.
• The detergent tablet got stuck in the dispenser and therefore was not
completely washed away by water.
• Water cannot wash away the detergent from the dispenser. Make sure
that the spray arm is not blocked or clogged.
• Make sure that items in the baskets do not impede the lid of the deter-
gent dispenser from opening.
Odours inside the appliance.
• Refer to "Internal cleaning".
Limescale deposits on the tableware,
on the tub and on the inside of the
door.
• Refer to "The water softener".
Dull, discoloured or chipped tableware.
• Make sure that only dishwasher-safe items are washed in the appli-
ance.
• Load and unload the basket carefully. Refer to basket loading leaflet.
• Place delicate items in the upper basket.
Refer to "Before first use", "Daily use"
or "Hints and tips" for other possible
causes.
Technical information
Dimensions Width / height / depth (mm) 596 / 818 - 898 / 575
Electrical connection
1)
Voltage (V) 220 - 240
Frequency (Hz) 50
Water supply pressure Min. / max. bar (MPa) 0.5 (0.05) / 8 (0.8)
Water supply
Cold water or hot water
2)
max 60 °C
12