User manual

How to activate the acoustic signal for the end of
programme
1. Press the on/off button to activate the appliance.
2. If necessary, do the Reset function.
3. Press and hold the programme button until the
programme indicator
starts to flash and the
programme indicator
comes on with fixed
light.
4. Press immediately the programme button.
•
The programme indicator
comes on with
fixed light.
•
The programme indicator
starts to
flash.
5.
Wait until the programme indicator
goes off.
The programme indicator
continues to
flash.
6. Press the programme button. The end indicator
comes on. The acoustic signal for the end of pro-
gramme is activated.
7. Press the on/off button to deactivate the appliance
and to confirm the setting.
How to deactivate again the acoustic signal for the
end of programme
1. Refer to “How to activate the acoustic signal for
the end of programme” and follow the procedure
from step (1) to step (5). The end indicator is on.
2. Press the programme button. The end indicator
goes off. The acoustic signal for the end of pro-
gramme is deactivated.
3. Press the on/off button to deactivate the appliance
and to confirm the setting.
Before first use
1. Make sure that the set level of the water softener
agrees with the water hardness in your area. If
not, adjust the water softener. Contact your local
water authority to know the water hardness in your
area.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Processing residues can stay in the appliance.
Start a programme to remove them. Do not use
detergent and do not load the baskets.
Adjusting the water softener
Water hardness
Water softener
adjustment
German
degrees
(°dH)
French
degrees
(°fH)
mmol/l Clarke
degrees
Level
47 - 50 84 - 90 8.4. - 9.0 58 - 63 10
43 - 46 76 - 83 7.6 - 8.3 53 - 57 9
37 - 42 65 - 75 6.5 - 7.5 46 - 52 8
29 - 36 51 - 64 5.1 - 6.4 36 - 45 7
23 - 28 40 - 50 4.0 - 5.0 28 - 35 6
19 - 22 33 - 39 3.3 - 3.9 23 - 27
5
1)
15 - 18 26 - 32 2.6 - 3.2 18 - 22 4
17