User manual

Water hardness
Water softener
adjustment
German
degrees
(°dH)
French
degrees
(°fH)
mmol/l Clarke
degrees
Level
11 - 14 19 - 25 1.9 - 2.5 13 - 17 3
4 - 10 7 - 18 0.7 - 1.8 5 - 12 2
< 4 < 7 < 0.7 < 5
1
2)
1) Factory position.
2) Do not use salt at this level.
Electronic adjustment
1. Press the on/off button to activate the appliance.
2. If necessary, do the Reset function.
3. Press and hold the programme button until the
programme indicator
starts to flash and the
programme indicator
comes on with fixed
light.
4.
Wait until the programme indicator
goes
off and the end indicator starts to flash. The pro-
gramme indicator
continues to flash.
5. Press the programme button. The end indicator
starts to flash. The intermittent flashing of the end
indicator refers to the current set level.
• E.g. 5 flashes + pause + 5 flashes = level 5.
6. Press the programme button again and again to
change the setting. Each time you press the pro-
gramme button the level number increases.
7. Press the on/off button to deactivate the appliance
and to confirm the setting.
Filling the salt container
Caution! Water and salt can come out from the
salt container when you fill it. Risk of corrosion.
To prevent it, after you fill the salt container, start a
programme.
1
2
3
4
Put 1 litre of water in the salt container (only for the
first time).
Filling the rinse aid dispenser
1
2
1
2
18