User manual

Using the detergent
A
B
C
Caution! Only use detergent specifically
designed for dishwashers.
1. Press the release button (A) to open the lid (C).
2. Put the detergent, in powder or tablets, in the
compartment (B).
3. If the programme has a prewash phase, put a small
quantity of detergent on the inner part of the
appliance door.
4. Close the lid. Make sure that the lid locks into
position.
Setting and starting a programme
The AUTO OFF function
This function decreases energy consumption by
deactivating automatically the appliance when it is not
operating.
The function comes into operation:
• 5 minutes after the completion of the programme.
• After 5 minutes if the programme has not started.
Starting a programme
1. Keep the appliance door ajar.
2. Press the on/off button to activate the appliance.
Make sure that the appliance is in programme
selection mode.
3. Press the button related to the programme you
want to start.
The related programme indicator comes on.
4. Close the appliance door to start the programme.
Starting a programme with delay start
1. Set a programme.
2. Press repeatedly until the indicator related to
the desired number of hours is on (3h or 6h).
The delay indicator is on.
3. Close the appliance door to start the countdown.
While the countdown is running, it is possible to
increase the delay time but not to change the
selection of the programme and options.
When the countdown is completed, the programme
starts.
Opening the door while the appliance operates
Opening the door while a programme is running stops
the appliance. It may affect the energy consumption and
the programme duration. After closing the door, the
appliance continues from the point of interruption.
If the door is opened for more than 30
seconds during the drying phase, the
running programme ends. It does not
happen if the door is opened by AirDry
function.
Cancelling the delay start while the countdown
operates
When you cancel the delay start you have to set the
programme and options again.
Press and hold simultaneously
and until the
appliance is in programme selection mode.
Cancelling the programme
Press and hold simultaneously and until the
appliance is in programme selection mode.
Make sure that there is detergent in the detergent
dispenser before you start a new programme.
End of the programme
When the programme is completed the indicator is
on.
1. Press the on/off button or wait for the AUTO OFF
function to deactivate the appliance. If you open the
door before the activation of AUTO OFF, the
appliance is automatically deactivated.
2. Close the water tap.
11